Cart 2 india

Specification
Amperage : 1 amps
Brand : SODONAD
BulletPoint1 : 【Strong Power】 The two-stroke engine with high power (1200W) and large displacement (32.7CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).
BulletPoint2 : 【3-in-1 Functions】 Our hammer machine equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .
BulletPoint3 : 【Saving Fuel】 The built-in carburetor can fully atomize fuel to decrease its consumption rate to save costs.
BulletPoint4 : 【Good Filtering Effect】 The built-in air filter can well filter impurities in gasoline to reduce engine consumption and extend its service life.
BulletPoint5 : 【Easy to Use】 The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine.
Color : Black
ExternallyAssignedProductIdentifier1 : 0756804310929
ExternallyAssignedProductIdentifier2 : 756804310929
IncludedComponents : inc
IncludedComponents1 : 1* Hammer Drilling Machine 3* Drills 1* Point Chisel
IncludedComponents2 : 1* Flat Chisel 1* Fuel Tank 1* Funnel
IncludedComponents3 : 1 * Charger
IncludedComponents4 : 1 * Toolkit
ItemName : 2-Stroke 1200W 32.7cc Gas Powered Blasting Jack Hammer with 3 Bits, 1 Tip Chisel and 1 Flat Chisel (24 * 9inch)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTorque : 1.5 newton_meters
ItemTypeKeyword : power-hammer-drills
Manufacturer : SODONAD
Material : Aluminum, Plastic
MaximumPower : 1200 watts
MaximumRotationalSpeed : 5000 rpm
ModelName : 2-Stroke Pneumatic Jackhammer
ModelNumber : 2-Stroke Pneumatic Jackhammer
NumberOfItems : 1
PartNumber : Malemollygebidemeyi81hbws
PowerSourceType : 1
ProductDescription :
Specification

Color: Black

Material: Aluminum, Plastic

Style: Modern

Surface Treatment: Painted Process

Assembly Required: Yes

Power: 1200W

Displacement: 32.7CC

Engine Type: Single Cylinder, Air Cooling, 2-stroke

Impact Frequency: 3200min-1

Impact Energy: 30J

Max Torque and Speed: 1.5N.m/5000rpm

Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)

Fuel Tank Capacity: 0.9L/0.2gal/30Oz

Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour

Max Drilling Diameter: 40mm/1.5inch

Starter System: Hand Pull Start

Noise: ≤104dB

Net Weight (Exclude Drill): About 10.5kg/23lbs

Product Size (L*H): 63*24cm/24*9inch

Engine Size: 36*32mm/14*12inch

Drill Size: 22*350mm/0.8*13inch

Point Chisel Size: 18*350mm/0.7*13inch

Flat Chisel Size: 16*280mm/6*11inch

Auxiliary Handle Length: 13cm/5inch

Installation

1.Press down the collet.

2.Put in a drill bit or chisel.

3.Release your hand.

4.The installation is complete.

Package Included

1* Hammer Drilling Machine

3* Drills

1* Point Chisel

1* Flat Chisel

1* Fuel Tank

1* Funnel

Other Accessories for Assembly

Notes

1.Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.

2.Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.

3.Please add lubricating oil regularly to ensure strong power.

4.Please do not touch the muffler exhaust hole to avoid scalding.

5.The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.

6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
ProductSiteLaunchDate : 2024-06-05T06:36:04.043Z
RegulatoryComplianceCertification1 : Q-09-001A
RegulatoryComplianceCertification2 : NSHSS.0635GD-016
Size : Large
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 1 volts
Wattage : 1200 watts