Specification AgeRangeDescription : adult Brand : Mingzhe BulletPoint1 : [Thermal Shock ] Endures rapid temperature changes from 80°c to -20°c without damage, ensuring long-lasting durability. BulletPoint2 : [Heat & Cold ] Withstands extreme temperatures from -20°c to 80°c, ensuring no cracks, expansion, or deformation. BulletPoint3 : [ & Pulling Strength] to high humidity and pulling forces, maintaining functionality under various conditions. BulletPoint4 : [Insulation ] Hall sensor lead wire insulation is guaranteed at 100 mω or more, providing reliable performance. BulletPoint5 : [Impact ] The product is rigorously tested to withstand falls from 50cm height in x, y, z directions, ensuring accuracy within 10%. Color : Incremental Abz ExternallyAssignedProductIdentifier : 7390585347083 ItemName : Hall Effect Rate Meter Male Thread 1~30l min Sensor for Water Measurement ItemPackageDimensions_Height : 2 centimeters ItemPackageDimensions_Length : 15 centimeters ItemPackageDimensions_Width : 9 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : electronic-component-hall-effect-sensors Manufacturer : Mingzhe Material : polyamide ModelName : Mingzhe9vz7fx31im ModelNumber : Mingzhe9vz7fx31im NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : Mingzhe9vz7fx31im ProductDescription : [Thermal Shock ] Endures rapid temperature changes from 80°c to -20°c without damage, ensuring long-lasting durability. [Heat & Cold ] Withstands extreme temperatures from -20°c to 80°c, ensuring no cracks, expansion, or deformation. [ & Pulling Strength] to high humidity and pulling forces, maintaining functionality under various conditions. [Insulation ] Hall sensor lead wire insulation is guaranteed at 100 mω or more, providing reliable performance. [Impact ] The product is rigorously tested to withstand falls from 50cm height in x, y, z directions, ensuring accuracy within 10%.
Spec:
Features: Impact : The product is packed well, fall from the 50cm height X, Y, Z direction to the concrete surface without abnormality, within 10% of the accuracy change. Insulation : The insulation between the Hall sensor lead wire and the valve body is 100 MΩ or more. (DC 500V). Heat : placed in 80 ± 3 ° C environment for 72h, return to normal temperature 1-2h without abnormalities, and parts without cracks, slack, expansion, deformation and other phenomena. Cold : It is placed in the environment of -20±3°C for 72h, returning to normal temperature for 1-2h without abnormality, and the parts have no crack, slack, expansion and deformation. Insulation withstand ability: The Hall sensor lead wire and the valve body are pressurized by AC600V (50/60Hz) for 1 second without insulation abnormality. : After being placed at 60±3°C and relative humidity of 90%~95% RH for 72h, the insulation is 1MΩ. Pulling strength: Apply 10N pulling force for 1 minute on the lead-out line, without loosening or breaking. Thermal shock : placed in an environment of 80±3°C for 1h, then placed directly in the environment of -20±3°C for 1h for a cycle, a total of 10 cycles, no cracks, slack, expansion, deformation, etc. phenomenon. Specification: Thread: G1/2 ProductSiteLaunchDate : 2025-05-05T17:27:14.319Z Size : 0-180 DEGREES_3.3V UnitCount : 1 UnspscCode : 41111900