Cart 2 india

Specification
Brand : Lufasa
BulletPoint : 12V 24V Magnetic Control Switch Relay Module Hall Sensor Module Alarm
BulletPoint1 : The operation is simple, easy to use, and cost-effective.
BulletPoint2 : Exquisite workmanship, no burrs and no injury to hands.
BulletPoint3 : materials, , wear- resistant and - resistant.
BulletPoint4 : The installation is firm, not easy to fall off, and is safe to use.
BulletPoint5 : Hall Effect Sensor is a very useful electronic tool.
Color : Assorted Color
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier : 4852343730177
ExternallyAssignedProductIdentifier1 : 0040048837374
ExternallyAssignedProductIdentifier2 : 040048837374
ItemName : 12V 24V Magnetic Control Switch Relay Module Hall Sensor Module Alarm
ItemPackageDimensions_Height : 0.5 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemTypeKeyword : electronic-component-hall-effect-sensors
Manufacturer : Lufasa
Material : Copper
MaximumSwitchingCurrent : 10 amps
MeasurementSystem : Metric
ModelNumber : VC5144GUYR17OU3
NumberOfItems : 1
PartNumber : ZGL-module-11875
ProductDescription : 1>.
Descriptions:
It is a 24V magnetic control relay module.It is mainly used for magnetic control detection,with its own relay,which can be directly connected to AC high-power products.
2>.Feature:
1.It uses a Hall sensor and has its own relay to directly control the load.
2.It uses wide voltage LM393 comparator.
3.It has 4 fixing bolt holes for easy installation.
4.It is widely used and can be used in many different scenarios.
3>.Parameter:
1.Product Name:24V Magnetic Control Relay Module
2.Working Voltage:DC 6V~24V
3.Output Load:AC 220V 10A/DC 30V 10A
4.Current:200mA(Min)
5.Work Temperature:-25℃~85℃
6.Work Humidity:5%~95%RH
7.Size:60*44*15mm
4>.
Notes:
1.The Hall sensor needs to be used in conjunction with a magnet.When a certain magnetic force is sensed,the relay is closed,and the common end is connected to the normally open end.When no magnetic force is sensed,the relay is disconnected,and the common end is connected to the normally closed end.
2.If the sensing distance between the Hall sensor and the magnet is within 5mm,it will be insensitive or there will be no triggering.
3.Common,normally open and normally closed three ports are equivalent to a dual control switch.When the relay coil is energized,the common terminal and the normally open terminal are connected;when there is no power,the common terminal and the normally closed terminal are connected;it will be in a conducting state,The relay is closed,when there is no magnetic force,it is in an off state.
5>.Package:
1.1pcs 24V Magnetic Control Relay Module
2.1pcs Positioning small board
3.1pcs 20cm 2P-Wire
ProductSiteLaunchDate : 2021-04-09T15:09:45.919Z
Size : 1.6X0.4cm
SupplierDeclaredDgHzRegulation : not_applicable