Cart 2 india

Specification
Amperage : 20 amps
Brand : Square D
BulletPoint1 : Auto-monitoring test performed every 90 minutes, ensuring it's ready to protect devices plugged into it
BulletPoint2 : Self-grounded with brass ground contact to ensure device’s ground retention to metal boxes which eliminates the need to bond the device with the ground screw
BulletPoint3 : Back wire pressure plates allows for up to two #12 wires to be securely captured for faster flexible installation
BulletPoint4 : High-impact resistant and durable thermoplastic for long-lasting product life
BulletPoint5 : Grounding screw pressure plate speeds ground wire installation
BulletPoint6 : Wattage: 2500.0 watts
Color : Matte White
CompatibleDevices : All
ConnectorType : Clamp
CurrentRating : 5 amps
ExternallyAssignedProductIdentifier1 : 785901544920
ExternallyAssignedProductIdentifier2 : 0785901544920
IncludedComponents : Outlet
InputVoltage : 5 volts
ItemName : Square D by Schneider Electric Square D X Series 125-Volt Tamper Resistant GFCI Duplex Decorator Receptacle Back Wire Clamps, 20 Amps, Matte White (SQR51201WH)
ItemPackageDimensions_Height : 11.0998 centimeters
ItemPackageDimensions_Length : 4.699 centimeters
ItemPackageDimensions_Width : 5.207 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : ground-fault-circuit-interrupter-outlets
Manufacturer : Schneider Electric
Material : Plastic
MeasurementSystem : Inch
ModelNumber : SQR51201WH
MountingType : Plug In Mount
NumberOfItems : 1
OperatingVoltage : 5 volts
PackageLevel : unit
PartNumber : SQR51201WH
ProductDescription :

Product parameters:

Voltage: 6V~30V(support micro USB 5.0V)

Output Capacity: can control no more than DC 30V 5A AC or 220V 5A

Quiescent Current: 20mA

Operating Current: 50mA

Operating Temperature: -40℃~85℃

Timing Range: 0.1seconds to 999 minutes(continuously adjustable)

Trigger Signal Source: High voltage level trigger(3.0V~24V), signal ground and system ground are not connected to improve system anti-interference ability(or you can connect them).

Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will memory forever . Warning: Relay contact is passive and electricity production; 1 channel has the control function on / off.

Operation Mode:

P1: After triggering signal, switch is connected for "OP" time, then disconnected; within the "OP" time:

P1.1: if trigger signal again, it is invalid.

P1.2: if trigger signal again, restart timing.

P1.3: if trigger signal again, switch is disconnected, stop timing.

P-2: After triggering signal, switch is disconnected for "CL" time, then switch is connected for "OP" time, and disconnect after timing.

P3.1: After triggering signal, switch is connected for "OP" time, then switch is disconnected for "CL" time, and enter loop. If trigger signal during loop, switch is disconnected and stop timing. The loop times (LOP) can be set.

P3.2: After power on, no need trigger signal, switch will be connected for "OP" time, then disconnected for "CL" time, and enter loop. The loop times (LOP) can be set

P-4: Signal holding function. If there is trigger signal, timing will be reset, switch remains connected; when the signal disappears, it will disconnect after "OP" time. During timing, if there is a signal, timing will be reset.

OP: Connect time. CL: Disconnect time. LOP: Loop times(1~999, "---" indicates infinite times).

C-L Sleep mode: within 5 minutes, no operation; ni
ProductSiteLaunchDate : 2022-06-09T18:41:59.387Z
Size : 20 Amps
SpecificationMet : cULus
Style : 20 Amps
SupplierDeclaredDgHzRegulation : not_applicable
TotalPowerOutlets : 2
UnitCount : 1
UnspscCode : 39120000
Voltage : 125 volts
Wattage : 2500