Cart 2 india

Specification
Brand : Jienk
BulletPoint : Sensor Blocks
BulletPoint1 : IDC pin pitch 2.54mm/0.1" male header connector. Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
BulletPoint2 : DIN Rail Mounting: Come with Din mount carrier and screws Compatible with 35mm, 32mm or 15mm DIN rail.
BulletPoint3 : Wire range: 26-16AWG. Rated voltage: 60V. Rated current: 1A / per pin. Operating temperature: -20 to 50 Celsius.
BulletPoint4 : The screw connectors make attaching and removing wires easily. Really helpful in your DIY prototyping project.
BulletPoint5 : Widely Applications: It is well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2x20 40-position header connector. Applications include the Raspberry Pi A+, B+, 2B, and 3B boards, all of which use a 0.1" pitch 2x20 I/O pin header for their GPIO expansion ports.
Color : Red
ConnectorType : Screw
CurrentRating : 1 amps
ExternallyAssignedProductIdentifier : 7320496102952
ExternallyAssignedProductIdentifier1 : 850069773113
ExternallyAssignedProductIdentifier2 : 0850069773113
IncludedComponents : Terminal Blocks
ItemName : Jienk IDC40 Breakout Board 2x20 40Pins Male Header Terminal Block Connector with C45 DIN Rail Mounting feet for PLC MCU
ItemPackageDimensions_Height : 0.7 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : ground-circuit-terminal-blocks
Manufacturer : Jienk
Material1 : Brass
Material2 : Copper
ModelNumber : JT428-429
MountingType : DIN Rail Mount
NumberOfContacts : 40
NumberOfItems : 1
NumberOfLevels : 1
NumberOfPositions : 40
OperatingVoltage : 600 volts
PartNumber : JT428-429
ProductDescription : Specifications:
IDC pin pitch 2.54mm/0.1" male header connector.
Pitch 3.81mm/0.15" screw terminal block.
DIN Adapters (brackets): for width 35 / 32 / 15mm DIN rails.
FR-4 fiber glass PCB, dual copper layers.
Rated voltage: 60V.
Rated current: 1A / per pin.
Operating Temperature: -20ºC to 50ºC
Terminal block specifications:
Wire range: 26-16AWG.
Strip length: 5mm.
Screws: M2,steel,Cr3+ Zn plated.
Torque: 0.2Nm (1.7Lb-In.)
Pin header and Cage: Brass.
Package Content:
1PCS IDC40 2x20 Pins 0.1" Male Header Breakout Board
ProductSiteLaunchDate : 2022-04-11T09:12:21.148Z
Size : IDC40 2x20Pin
SpecificationMet1 : UL
SpecificationMet2 : cUL
SpecificationMet3 : IEC
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39121400
UpperTemperatureRating : 50 degrees_celsius
Voltage : 60 volts