Cart 2 india

Specification
Brand : Dremel
BulletPoint1 : For finishing work and light deburring
BulletPoint2 : Great for paint & rust removal
BulletPoint3 : Cylinder shaped point
BulletPoint4 : Features: Electroplated diamond has high hardness and good wear resistance. Chamfered round shank provides easier clamping and stable working process.
BulletPoint5 : Tips: Always use lubricant (water or cutting fluid) to cool the workpiece when the grinding bit is working. Low drill pressure and increased use of water lubrication will extend the life of mounted point.
Color : Abrasive
ExternallyAssignedProductIdentifier1 : 080596011895
ExternallyAssignedProductIdentifier2 : 0080596011895
ItemName : Dremel 518 Abrasive Point (Cylinder)
ItemPackageDimensions_Height : 2.7 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 4.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : abrasive-grinding-mounted-points
Manufacturer : Dremel
ModelNumber : 518
PartNumber : 518
ProductDescription : Specifications:
Head Diameter: 16mm / 0.63" (spherical diameter is about 1mm-1.5mm smaller than the head diameter.)
Shank Diameter: 6mm / 0.24"
Shank Length: 19mm / 0.75"
Overall Length: 50mm / 1.97"
Grits: 100 (coarse grit)
Head Shape: Spherical, Concave (the concave arc is smaller than a semicircle.)
Material: Diamond, Carbon Steel
Package Included: 1pcs x Diamond Mounted Point

Descriptions:Electroplated diamond has high hardness and good wear resistance. Chamfered round shank provides easier clamping and stable working process.
Suitable for polishing jade, amber, stone, beeswax, glass etc. Specially used for forming and grinding spherical bead. Produce clean and accurate spherical beads in minutes with little or no chipping.
Always use lubricant (water or cutting fluid) to cool the workpiece when the grinding bit is working. Low drill pressure and increased use of water lubrication will extend the life of mounted point.
Can be used on bench drills, hand drills (not included here). The recommended speed is 2000-3000 rpm/min, for general purpose grinding in wide ranges of applications.
Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2004-07-02T00:01:00-00:00
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31191600