Cart 2 india

Specification
Brand : Anncus
BulletPoint1 : Type: Logic ICs
BulletPoint2 : Condition: New
BulletPoint3 : Operating temperature: 1
BulletPoint4 : Is customized: Yes
ItemName : Anncus PLC FX2N Supports on-line Download Monitoring Touch Screen Text Power Off and Hold RS232 RS485 Interface
ItemTypeKeyword : abrasive-grinding-discs
Manufacturer : Anncus
Material : Copper
PartNumber : ACS-9FC031A3D9DD42D189625CF0B76DC588
ProductDescription : Has been fully upgraded
Model:XT2N-32MDR-D-V2 Power Supply: DC24V Baud Rate: 9600/19200 Communication Port: Serial Port, RS485
Type: FX2N Points: 32 Points Fully Concurrent with GX8.5 Plates
RS485 Communication, RS DirectivefreeThe communication protocol adds CRC checking to support the communication of frequency converter and so on.
One:This product currently supports the following resources:
Soft components:
X0-X27Y0-Y27,
M0-M255, M512-M768(Power failure maintenance)
S0-S255,
T0-T87 (100mS)timerT 200-T 215 (10mS)timerT 250-T 255 (100mS)Integral Timer)
C0-C87, C112-C159 (16)Bit Outage Holding Counter),C200-C203 (32Bit plus minus outage holding counter),C235 (32Bit high-speed add-subtract outage holding counter),
D0-D115, D512-D559(Power failure maintenance)
V0-V7, Z0-Z7. N0~N7 P0~P8
Special Soft Components:
M8000 (Operating Monitoring Contact),M8001 (Operational Monitoring Anti-Contact.
M8002 (Initialization of Pulse Contacts), M8003.Initialization of Pulse Back Contact.
M8004 (Error Indicating Contact.
M8011 (10Millisecond clock pulse), M8012 (100)Millisecond clock pulse), M8013 (1)Second clock pulse), M8014 (1)Clockwise pulse.
M8020 (Zero mark), M8021.Borrow flag), M8022.Carry mark.
M8029(Instruction Execution End Mark.
M8033 (Memory retention contacts.
M8034 (Prohibit Output Contacts.
M8040(Transfer prohibition) S0Initial state of each operation
M8041(Transfer begins) S1The Initial State of Origin Regression
M8042(Initial pulse) S2Initial state of automatic operation
M8050~M8053They are interruptions.X0~X3
M8067Operational error flag
M8122(RSSend)
M8123(RSReception)
M8147(Y0High Speed Output)M8148(Y1High Speed Output)
M8160(high)8Bit and low8Bit-switching coordinationXCHInstruction use)
M8161(ONtimeRSThe instruction is sent as8Bit, high zero.OFFby16Bit send)
M8163ONtimeCCD checkInstructions forCRCcheck,OFFbyLRCcheck
M8200-M8203 (C
ProductSiteLaunchDate : 2023-03-10T15:44:21.113Z