Cart 2 india

Specification
Brand : 3M
BulletPoint1 : Soft abrasive mineral and non-woven web are ideal for cleaning, blending, finishing, and light coating and corrosion removal
BulletPoint2 : Conformable pad gets into corners and over contoured surfaces to produce a uniform finishOpen web construction resists loading and rinses clean for repeated use
BulletPoint3 : Non-woven 3D structure provides long life and consistent finishes
BulletPoint4 : Attaches to random orbital sander (hookit backup pad) for increased cut-rate and cover larger areas
BulletPoint5 : Conformability for access to hard-to-reach areas
Color : Gray
CompatibleDevices : orbital sander
ConstructionType : Coated
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 50048011300387
ExternallyAssignedProductIdentifier1 : 0762716300033
ExternallyAssignedProductIdentifier2 : 762716300033
ExternallyAssignedProductIdentifier3 : 0728028210699
ExternallyAssignedProductIdentifier4 : 0072802810699
GpsrSafetyAttestation : 1
IncludedComponents : 25 Clean and Finish Discs
IndustryStandardIdentifier : Cubitron II
ItemName : 3M Scotch-Brite Clean and Finish Disc - Ultra Fine Grit Silicon Carbide - Cleaning and Finishing Disc - For Aluminum, Stainless Steel - 11.25'
ItemPackageDimensions_Height : 31.115 centimeters
ItemPackageDimensions_Length : 27.305 centimeters
ItemPackageDimensions_Width : 30.48 centimeters
ItemPackageQuantity : 25
ItemTypeKeyword : abrasive-grinding-discs
Manufacturer : 3M
Material : Silicon Carbide
Material1 : NorZon
Material2 : Ceramic
MaximumRotationalSpeed : 1900 rpm
ModelName : Scotch-Brite Clean and Finish Disc, 11 1/4 in x NH, S ULF, 25 per case
ModelNumber : 048011300382
NumberOfItems : 25
PackageLevel : unit
PartNumber : 048011300382
ProductDescription : Outer Diameter: : 200mm (8'') Arbor Hole Diameter: 12.7mm Thickness 12mm Quantity: : 1 Pc Material: Zinc The new disc needs to be drained of water and rubbed inward with coarse sandpaper (60-80) until no scratches are found. Then, fine sandpaper (240) is used to polish it finely. After repairing the old disc, the same treatment method is used. Polish a small amount of polishing powder with diamond oil to loosen the paste, and continue polishing the disc on 80-150 # sandpaper. The disc needs to maintain a certain humidity, and the polishing powder should be evenly covered on the disc until the surface of the disc is black. Polishing can begin.
ProductSiteLaunchDate : 2012-09-21T00:00:01-00:00
Size : 11 1/4 in x NH
Style : SULF
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 25
UnspscCode : 31191600