Cart 2 india

Specification
Brand : LUOSHALIYA
BulletPoint1 : 【Wide Application】Cold rolled steel for the rollers, and aluminum for body and Stainless steel hopper and oil impregnated brass bushings. The grain mill is professional in grinding barley, wheat and other cereals.
BulletPoint2 : 【2 Rollers Equip】It is provided with adjustable 2 rollers which can be crushed cereal well and peeled shell off perfectly, so as to be good for brewing beer in future. With two rollers, all your grain will be crushed twice in one cycle. The crush is through the fixed gap between the top two rollers.
BulletPoint3 : 【Minimal Damage】The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage.
BulletPoint4 : 【Drive Shaft】The hopper can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible.
BulletPoint5 : 【Easy to Use】You don't need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of 0.070". Adjusting is simple just loosen the adjustment screws, adjust the gap and tighten the adjustment screws.
Capacity : 165 pounds
CareInstructions : Hand Wash
Color : Sliver
ExternallyAssignedProductIdentifier1 : 0722487763093
ExternallyAssignedProductIdentifier2 : 722487763093
GpsrSafetyAttestation : 1
IncludedComponents : 1
IncludedComponents1 : 1 x Main Machine
IncludedComponents2 : 1 x Funnel
IncludedComponents3 : 1 x Manual Instructions
IncludedComponents4 : 2 x Brackets
IncludedComponents5 : 4 x Foot Pads; All Accessories for Installation
ItemName : Homebrew Grain Mill 2 Stainless Steel Rollers Manual Malt Mill Crusher Barley Grain Grinder 4L Malted Grain Mill Integral Drive Shaft and Axles for Homebrew Beer Mill
ItemPackageDimensions_Height : 9.8044 centimeters
ItemPackageDimensions_Length : 3.6068 centimeters
ItemPackageDimensions_Width : 9.4996 centimeters
ItemTypeKeyword : grain-mills
LeagueName : Electric Mill Cereals Grinder
Manufacturer : GIBEIBEI
Material : Stainless Steel
ModelName : mill
ModelNumber : 1
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : _70-WJDLEGS
ProductDescription :

Application

Cold rolled steel for the rollers, and aluminum for body and Stainless steel hopper and oil impregnated brass bushings. The grain mill is professional in grinding barley, wheat and other cereals.

Features

Width and roller diameter is optimized for use with power drill.

Adjustable rollers at both ends to give uniform crush.

12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging.

6" long adjustable gap.

Fully adjustable mill.

0.060" fixed primary gap, 0-0.065" fully-adjustable secondary gap.

Dual eccentric adjusters built from stainless steel for no galling.

8 lbs / minute is average throughput.

6" x 1.5" diameter stainless steel rollers.

Crankshaft can be turned clockwise or counterclockwise

Durable alloy frame

SAE 841 oil impregnated bronze bushings

Heavy-duty two-roller mill with adjustable secondary gap-spacing

Integral drive shaft and axles

Mill can be hand-cranked or motorized with a corded electric drill

You will need to supply or build a base

Parameters

Color: Silver

Type: Grain crusher

2 rollers: Stainless steel

Grinder housing: Aluminum

Hoppers: Stainless steel（4L）

Speed:8lbs/min(3.6KG/min)

Total height: 260mm(10.2")

Hopper dimensions at top: 220 x 210mm((8.7" x 8.3")

Footprint size of grinder: 140 x 80mm(9.4" x 3.1")

Roller dimension: 76 x 150 x 50mm(3" x 6" x 2")

Single roller: ø 38 x 150mm (1.5" x 6")

The ribbed rollers are adjustable at both ends of the slot.

Roller adjustable approx.  0.1 - 2.5 mm

With 2 aluminum bars

Crank handle: 120mm(4.7")

Package Included

2x Aluminum Bars

1x PC Malt Mill

1x PC Hopper

1x PC Crank Handle

ProductSiteLaunchDate : 2023-04-19T06:34:47.284Z
RecommendedUsesForProduct : Grinding
Size : 1
SpecificUsesForProduct : Grinding grains for homebrewing beer
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TeamName : Electric Grinding Machine
UnitCount : 1
UnspscCode : 52141500
Voltage : 110 volts
Wattage : 2200 watts