Cart 2 india

Specification
Brand : Oiveinya
BulletPoint1 : ★【Solid and Durable】 The product is made of metal, strong and stable, not easy to damage and corrosion, and uses the fourth generation chip design circuit board, significantly improving stability.
BulletPoint2 : ★【Vacuum Back Suction】 This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively prevent the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean and tidy working environment.
BulletPoint3 : ★【Quick Start】 This item adopts a high-quality electronic valve, which can instantly start the diaphragm valve and increase the working efficiency by more than 80%.
BulletPoint4 : ★【Precise Drip】 The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
BulletPoint5 : ★【Stable Voltage Change】 Features a high-end all-copper coil transformer, which can stabilize the voltage change and increase the service life, and can be used in high-frequency and high-intensity work scenarios, improving operational safety while being efficient and energy-saving.
Color : Black
ExternallyAssignedProductIdentifier1 : 0756804449315
ExternallyAssignedProductIdentifier2 : 756804449315
IncludedComponents : Product & Instructions Guide
ItemName : Semi-automatic Glue Dispenser Machine,Pneumatic Dispensing Controller Dispenser Solder Liquid Controller Liquid Adhesive Controller Dropper Machine
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 24 centimeters
ItemPackageDimensions_Width : 22 centimeters
ItemTypeKeyword : construction-glue-guns
Manufacturer : GydsgorUS
Material : Metal
ModelName : Walfronttav42o5cxg
ModelNumber : 982
NumberOfItems : 1
OperationMode : Semi-Automatic
PartNumber : WALFRONTtav42o5cxg
PowerSourceType : Corded Electric
ProductDescription :

Description

Are you affected by the slow speed of traditional drip glue, which affects productivity? Are you often wasting a lot of glue material? Do you feel that the precision of glue dripping is low and difficult to control? Choose this semi-automatic glue dispenser machine, which can precisely control the dripping speed and improve the working efficiency, bringing you a more efficient and energy-saving working experience!

Details

An-ti-sl-ip Feet: The bottom has an-ti-sl-ip feet so that the product is placed more stable and does not easy to fall down and sl-ip.

Rounded Corners: The corners have been polished to become smooth and rounded, reducing the risk of you being accidentally bumped at work.

Application

It is suitable for most of the yellow glue, quick-drying glue, epoxy resin, etc. in the market, and is widely used in bonding various electronic components, machine production, instrumentation, jewelry, and other objects.

Specification

Color: Black

Model: 982

Material: Metal

Spitting Mode: Manual / Semi-automatic

Minimum Drip Volume: 0.01ml

Spitting Time Interval: 0.1-9.9s

Automatic Timing(Can Be Set): 0.01-30s

Repeat Accuracy: ±0.5%

Internal Voltage: 12-24DC

Input Air Pressure: 2.5-7bar(35-100psi)

Output Air Pressure: 0.1-5.5bar(1-78psi)

Power Supply: 110V AC, 60Hz

Power Consumption: 20W

Plug Specification: American Standard 110V

Product Size:23*15*6cm/9.05*5.9*2.36in

Package Size:20*26*14cm/10*9*12.5in

Gross Weight: 2.1kg/4.63 lbs

Package Included

1* Dispenser Main Unit

1* Manually Switch

1* Foot Switch

1* Air Tube

1* Connection Tube

1* Power Cord

1* Dispenser Stand

2* 30CC Liquid Barrels

6* Dispensing Needles

1* Chinese and English Manual

Notes

1. The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.

2. If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.

3. When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent.

4. Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation.

5. Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.

ProductSiteLaunchDate : 2024-07-02T05:45:54.264Z
Style : Trigger
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 44121605
Voltage : 110 volts_of_alternating_current