Cart 2 india

Specification
Brand : Fhis Dispensing
BulletPoint1 : ★Model: X001: Adhesive Injecting Dispenser Equipment Hot Melt Glue Spray Injecting Machine110V.
BulletPoint2 : ★High Quality: All-purpose, good feeiciency, fast bonding, heat power saving no waster of glue and improvement in quality.
BulletPoint3 : ★Parameter 1: Maximum viscosity; 10000 CPS;Working temperature: 160-180°C;Temperature control range: 0-300°C.
BulletPoint4 : ★Parameter 2: Power: 900W; Sol speed: 3KG/HR;Solvent capacity: 3KG/HR.
BulletPoint5 : ★If you have any problems with the purchasing, please feel free to contact us. MONIPA are always at your service.
Color : Red
CompatibleMaterial : Paper,packaging
Department : unisex-adult
ExternallyAssignedProductIdentifier : 7609498226409
ExternallyAssignedProductIdentifier1 : 0738627824913
ExternallyAssignedProductIdentifier2 : 738627824913
FinishType : Chrome
GpsrSafetyAttestation : 1
IncludedComponents : Base
ItemDisplayDimensions_Height : 2.36 inches
ItemDisplayDimensions_Length : 7.09 inches
ItemDisplayWeight : 0.3 pounds
ItemForm : Spray
ItemName : 900W Hot Melt Glue Spraying Gluing Machine Adhesive Injecting Dispenser Equipment
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : construction-glue-guns
Manufacturer : MNP
Material : Thermoplastic Polymer (Hot Melt Adhesive)
ModelName : GZEMHGPE
ModelNumber : X001
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FHIS003
PowerSourceType : hand-powered
ProductDescription : Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Photo frame: identification labels; Small paper products are bonded and fixed; small ornaments, crafts, hairpins, water polo, etc.; electronic products are fixed. Adhesive. Insulation; other manual or semi-automatic use of glue is required.

Features：
Model: X001
Power: 900W
Sol speed: 3KG/HR
Solvent capacity: 3KG/HR
Maximum viscosity; 10000 CPS
Working temperature: 160-180°C
Temperature control range: 0-300°C

safety precaution:
Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive
1. The gas circuit should avoid too much water vapor entering
2. The hot melt adhesive capacity must not exceed seven p
3.The maximum total air pressure is set to 4KG
4. Before heating the melted glue, the pressure of the storage bucket must be released first.

Preparation for operation:
1. Confirm the safety protection measures
2. Check if the machine is 110VAC and there is no fluctuation in the pressure
3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)
5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
6. Check if the air supply system is basically dry and the air pressure is stable
7. Power on and test the circuit of each part.

ProductSiteLaunchDate : 2020-04-06T08:14:10.030Z
Size : 20G
SpecificUsesForProduct1 : Toy
SpecificUsesForProduct10 : Paper Product
SpecificUsesForProduct11 : Electronic Product
SpecificUsesForProduct12 : Other Manual or Semi-Automatic Use
SpecificUsesForProduct2 : Packaging
SpecificUsesForProduct3 : Handbag
SpecificUsesForProduct4 : Small Appliance
SpecificUsesForProduct5 : Wire
SpecificUsesForProduct6 : Connector
SpecificUsesForProduct7 : Audio
SpecificUsesForProduct8 : Photo Frame
SpecificUsesForProduct9 : Label
Style : Trigger
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Adults
UnitCount : 1
UnspscCode : 31201600
Viscosity : 10000 CPS
Voltage : 110 volts
Wattage : 900 watts