Cart 2 india

Specification
Brand : DNYSYSJ
BulletPoint1 : 【Adhesive Injecting Dispenser Parameters】-- Power: 900W; Dissolving speed: 3KG/HR; Solvent capacity: 3KG/HR; Maximum viscosity; 10000CPS; Working temperature. 160-180°C; Temperature control range. 0-300°C
BulletPoint2 : 【Wide Application Scope】-- This high quality hot melt glue gun is widely used for bonding, fixing, wiring and insulating toys, ornaments, small home appliances, handicrafts, electronic components and so on. It has stable and superior performance, and is a good helper for DIY design.
BulletPoint3 : 【Professional Glue Sprayer】-- This commercial hot melt glue gun is made of high quality material, with a sturdy and durable appearance, good impact resistance and heat dissipation. It has stable and superior performance, and is a good helper for DIY design.
BulletPoint4 : 【Caution】-- Please be sure to wear safety gloves, goggles and long-sleeved work clothes when using this machine to avoid being burned by the hot liquid hot melt glue; the tank pressure must be released before adding hot melt glue; the maximum total air pressure is set to 4KG; the air circuit should avoid excessive water vapor entering; the capacity of the glue of hot melt glue should not exceed 7 points of the tank capacity.
BulletPoint5 : 【Customer Service】-- Our products go through strict quality inspection procedures to ensure that the products put into the market are of high quality. If you have any questions, please feel free to contact us.
Color : Blue,green,pink,white
CompatibleMaterial : Clothes,Diy
ExternallyAssignedProductIdentifier1 : 0197220024258
ExternallyAssignedProductIdentifier2 : 197220024258
IncludedComponents : 1 Hot Melt Glue Spray Injecting Machine
ItemName : 110v Commercial Hot Melt Glue Spray Injecting Machine 900w,Semi-Automatic Adhesive Hot Glue Gun 10000 Cps Viscosity,Hot Melt Glue Dispenser Equipment For Industries
ItemPackageQuantity : 1
ItemTypeKeyword : arts-and-crafts-glue-guns
Manufacturer : Amobink
ModelName : Hot Melt Glue Spray Injecting Machine
ModelNumber : BI-ZMLJM-440-US
NumberOfItems : 1
PartNumber : BI-ZMLJM-440-US
PowerSourceType : Corded Electric
ProductDescription :

Features：

Power: 900W

Sol speed: 3KG/HR

Solvent capacity: 3KG/HR

Maximum viscosity; 10000 CPS

Working temperature: 160-180°C

Temperature control range: 0-300°C

Safety Precaution:

1. The gas circuit should avoid too much water vapor entering

2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.

3.The maximum total air pressure is set to 4KG

4. Before heating the melted glue, the pressure of the storage bucket must be released first.

Preparation for Operation:

1. Confirm the safety protection measures

2. Check if the machine is 110VAC and there is no fluctuation in the pressure

3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)

5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.

6. Check if the air supply system is basically dry and the air pressure is stable

7. Power on and test the circuit of each part.

Boot Steps:

1. Connect the power and turn the power switch to ON

2. Check if the temperature of the temperature controller is within the above range

3. Check whether the pressure relief is turned in the direction of pressure holding

4. Connect the origin, set the pressure value, and start the operation

Shutdown Steps：

1. Release the foot switch to cut off the main power

2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0

ProductSiteLaunchDate : 2022-11-21T08:18:55.008Z
Size : 4.55 x 2.1 x 7.25
Style : Barrel
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts
Wattage : 900 watts