Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Voltage: DC12V; No-Load Speed: 74rpm; Reduction rate: 1:54; Torque: 6.4Kg.cm(3.47lb.in).
BulletPoint2 : Output Shaft Diameter: 8mm D-type, Output Shaft Length: 15mm.
BulletPoint3 : Total Size(not include shaft):40*36*125mm/1.57*1.57*1.41*4.92inch.
BulletPoint4 : Application: Worm Gear Motor With Encoder And Cable, widely used for intelligence appliance, robots, Rocker arm camera, and Electric paper cutter.
BulletPoint5 : Shaft rotation direction can be changed by changing the positive and negative wiring.
Color : C38s6g5-1000z
IncludedComponents : inc
ItemName : uxcell DC 12V 74RPM 6.4Kg.cm Self-Locking Worm Gear Motor with Encoder and Cable, High Torque Speed Reduction Motor
ItemPackageDimensions_Height : 16.002 centimeters
ItemPackageDimensions_Length : 5.08 centimeters
ItemPackageDimensions_Width : 8.636 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : mechanical-gearboxes
Manufacturer : uxcell
NumberOfItems : 1
PartNumber : a17092900ux0361
ProductDescription : Description
DC 12V 74RPM 6.4Kg.cm Self-Locking Worm Gear Motor With Encoder And Cable, High Torque Speed Reduction Motor

Specification:

Voltage: DC 12V
No-Load Speed: 74rpm
Reduction rate: 1:54
Torque: 6.4Kg.cm
Error: ±10%
Wire Length: 20cm / 7.87inch
Output Shaft Diameter: 8mm / 0.31inch D-type
Output Shaft Length: 15mm / 0.59inch
Total Size(not include shaft):40*36*125mm / 1.57*1.41*4.92inch


Wirings:
Notice:
1. The yellow and green wires are the speed signal output line, and they can't be connected any power supply, or it will be burnt.
2. Positive and negative power supply of encoder do not allow connect wrong;voltage is 3.3-5V.
3. Control CW or CCW of motor by changing the positive and negative power supply of encoder (change Red Wire and White Wire connect)


Red Wire - positive power supply of motor(+)
White Wire - negative power supply of motor(-)
Black Wire - negative power supply of encoder(-) (positive and negative power supply of encoder do not allow connect wrong;voltage is3.3-5V)
Blue Wire - positive power supply of encoder(+) (positive and negative power supply of encoder do not allow connect wrong;voltage is 3.3-5V)
Yellow Wire - signal feedback (11 signals per motor turns a circle)
Green Wire - signal feedback (11 signals per motor turns a circle)


Package Include:
1 x motor , 1 x 6-Wire Connector

ProductSiteLaunchDate : 2017-12-07T08:16:41.901Z
Size : 12V 74RPM
Speed : 74 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
Voltage : 12 volts