Cart 2 india

Specification
Brand : AGULIUM
BulletPoint1 : Wide Compatability: With a compact size(3.54x3.54x9.84 inches), 25NM torque, and reversible function, the gear reduction motor suits various fields and machines
BulletPoint2 : Speed Control Unit: The gear reducer motor comes with one knob and two modes of speed adjustment. One type of speed adjustment is at the scale of 10-90%, where each scale represents 10% of the speed. The other is an infinite adjustment at the scale of "HIGH", "RUN" and "LOW"
BulletPoint3 : Superior Performance: All metal gears, double ball bearings, and pure copper coils can reduce friction and temperature during use to ensure stable operation. High-quality double-ball bearings can reduce the friction between the rollers and bearings, resulting in higher rotational speeds, less overheating
BulletPoint4 : Build to Last: The gear reducer motor is made of quality aluminum alloy and 40cr alloy steel, together with tempering treatment, fine finish, and nitrogen treatment, making it not easy to wear, rust and deform
BulletPoint5 : Fast Heat Dissipation: The built-in cooling fan, cooling hole design, and pure copper coils with stable performance can effectively dissipate heat to ensure long-term stable operation
Color : Ratio 7.5 to 1
ExternallyAssignedProductIdentifier : 3002980597607
IncludedComponents : 1* Gear Reducer Motor; 1* Speed Controller
ItemName : AGULIUM 120W 110V 80K Worm Gear Reducer Motor with Speed Controller, 50/60HZ Adjustable Variable Speed Gear Reduction Motor, Reducer Ratio 1:80, Torque 25NM, Shaft Bore Diameter 14mm
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : mechanical-gearboxes
Manufacturer : AGULIUM
ModelName : WLHHB0
ModelNumber : WLHHB0
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZ8V7C7QNSW
ProductDescription :

Specifications

• Color: Grey
• Reversible: Yes
• Assembly Required: No
• Model: M120A-501
• Motor Type: Pure Copper Wire
• Material: Aluminum Alloy, 40cr Alloy Steel
• Process: Tempering Treatment, Fine Finish, Nitrogen Treatment
• Reduction Ratio: 1: 80(80K)
• Motor Speed: 50Hz: 90-1350r/min, 60Hz: 90-1650r/min
• No-load Speed: 1350r/min     
• Rated Torque: 25NM
• Shaft Bore Diameter: 14mm/0.55inch
• Capacitance: 25μF
• Power: 120W
• Voltage: 110V
• Total Length of Wire: About 1m/3.28ft                     
• Motor Size: 9*9*25cm/3.54*3.54*9.84inch
• Speed Control Unit Size: 6*10*9cm/2.4*3.9*3.5inch
• Packaging Size: 28.5*24*12.5cm/11.22*9.45*4.92inch
• Gross Weight: 6kg/13.23lbs

Package Included

• 1* Gear Reducer Motor
• 1* Speed Controller

Notes

• 1.Please check the size carefully before ordering.
• 2.Please connect each wire correctly to ensure that the machine can operate normally.
• 3.Based on industry standards, to meet the different needs of customers, please note that our motors do not include power cords. You need to purchase a power cord to connect.
• 4.Please note that the output shaft speed varies at different reduction ratios. The output shaft speed is equal to the motor speed divided by the reduction ratio.
• 5.Please note that the gearbox has been greased, but you need to refill it yourself after about 100 hours of use.
• 6.If the motor is lightly loaded and not running for a long period, the controller can be adjusted to 50% of full speed. When the motor is loaded and working continuously for a long time. The controller should not go below 70% of full speed. Because the motor is decelerated by voltage reduction, the torque will also become smaller after voltage reduction and may be overloaded. At this time, due to the increase of current, the heat dissipation will become worse, and the motor will also heat up seriously, which will damage the service life of the motor.

ProductSiteLaunchDate : 2024-12-10T07:37:37.050Z
Size : 71B5
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111500