Cart 2 india

Specification
Brand : Valterra
BulletPoint1 : Unrestricted flow
BulletPoint2 : Use with liquids and gases.
BulletPoint3 : Country of Origin: MEXICO
BulletPoint4 : Item Package weight : 1.899 pounds
BulletPoint5 : 2 NPT threaded connections.
ConnectorType : Spigot
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 8886481773921
ExternallyAssignedProductIdentifier1 : 019079793034
ExternallyAssignedProductIdentifier2 : 0019079793034
ExternallyAssignedProductIdentifier3 : 00019079793034
IncludedComponents : VALVE
ItemName : Valterra 9303S ABS Pneumatic Gate Valve, 3" Spigot w/ Stainless Steel Paddle & Gate Keeper
ItemPackageDimensions_Height : 43.2 centimeters
ItemPackageDimensions_Length : 11.3 centimeters
ItemPackageDimensions_Width : 11.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-gate-valves
Manufacturer : Valterra Products
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : Acrylonitrile Butadiene Styrene (ABS)
MaximumOperatingPressure : 200 pounds_per_square_inch
ModelName : aqxreightbsmgxnd0rz
ModelNumber : 9303S
NumberOfItems : 1
NumberOfPorts : 1
PackageLevel : unit
PartNumber : 9303S
ProductDescription : A gate valve is utilized to obstruct the movement of fluid within a system. It is categorized as a valve with linear motion and is unsuitable for controlling or regulating fluid flow due to its limitations in achieving flow control. If employed for fluid control and regulation, the gate valve's seating surface and disc may be subject to erosion. Operating a gate valve necessitates a small amount of space along the pipeline. The gate valve is designed to be either fully open or fully closed. It consists of various components, including the body, seat, stem, bonnet, wedge, gasket, and hand wheel. The central disc of the gate valve obstructs fluid flow and can be raised or lowered by rotating the wheel handle. This rotation can be performed in a clockwise direction to open or close the valve. By requiring multiple rotations of the handle between the open and closed positions, the gate valve helps prevent water hammer effects. Furthermore, the velocity at which the fluid travels through the valve can be adjusted gradually. This gate valve is made of Stainless steel SS316 material and solid taper wedge, it commonly used due to its strength and simplicity. This type of gate valve is suitable for various fluids. However, the disc design is prone to leakage. It is suitable for medium to low pressure temperature application. This gate valve can withstand working pressure up to 200 PSI and working temperature of -29°C to 150°C. Conform to ASME B16.34 design and it comes with 2 threaded NPT ends.
ProductSiteLaunchDate : 2017-03-14T23:37:42.357Z
Size : 1 1/2" NPT
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : Gate Valve