Cart 2 india

Specification
Brand : ESAB
BulletPoint : Argon Regulator For Lotos Welder
BulletPoint1 : Use of dry nitrogen gas also minimizes the need to evacuate moisture from the system
BulletPoint2 : Process for this regulator is Oxy-Acetylene Components
BulletPoint3 : For use on high capacity and HVAC applications
BulletPoint4 : Range for the gauges is 600 to 4,000 PSIG
BulletPoint5 : Delivery range is from 0-500 PSIG
Color : Blue
Color1 : Yellow
Color2 : Gold
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 00850034034003
ExternallyAssignedProductIdentifier1 : 716352119269
ExternallyAssignedProductIdentifier2 : 0716352119269
ExternallyAssignedProductIdentifier3 : 00716352119269
ExternallyAssignedProductIdentifier4 : 0716352021777
ExternallyAssignedProductIdentifier5 : 00716352021777
IncludedComponents : Argon Regulator
ItemDisplayWeight : 5 pounds
ItemLength : 60 inches
ItemName : TurboTorch 0386-0814 245-03P Regulator Nitrogen Certified
ItemPackageDimensions_Height : 22.606 centimeters
ItemPackageDimensions_Length : 12.0904 centimeters
ItemPackageDimensions_Width : 18.4912 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : welding-gas-regulators
Manufacturer : Victor
Material : Copper
Material1 : Brass
Material2 : Rubber
MaximumPressure : 4000 pounds_per_square_inch
ModelName : AR04
ModelNumber : 0386-0814
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 0386-0814
Pattern : AR04
ProductDescription : Gasland chef gas pressure regulator has 1" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying. Do not install the regulator too close to the heating equipment or use in very cold environment.

PRODUCT DESCRIPTION

Brand: Gasland chef
Gas type: Natural Gas (NG)
Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar)
Outlet pressure range: 3” - 6” Water Column
Ambient operating temperature range: 32°F - 225°F (0°C - 107°C)
Refer to the pictures on how to find the correct pipe thread size. This regulator has 1/2" openings for 1/2" gas pipes. 1/2" IN and 1/2" OUT Female Pipe Thread. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying.

ATTENTION

NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS
The pipe fittings for this regulator are based on NPT pipe threads - dimensions according ANSI/ASME B1.20.1 standards
Install the regulator properly with gas flowing as indicated by the arrow on the casting
*NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator

KINDLY NOTE

WARNING: The NPT thread size is NOT referring to the size of the thread itself!
The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe
Measuring the pipe will often mislead you into choosing the wrong pipe size
The "pipe thread size" is measured and based on the inside of the pipe
A lot of people measured the thread / the opening for the thread/outside diameter！
ProductSiteLaunchDate : 2009-09-09T00:04:36-00:00
Size : 1-(Pack)
StreetDate : 2018-03-23T00:00:01Z
Style : 1/2 in. MIP x 1/2 in. MIP
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
UnitCount : 1
WebsiteShippingWeight : 0.181 kilograms