Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Certifications: ANSI Z21.80/CSA 6.22 Line Pressure Regulators.
BulletPoint2 : Gas Type: Suitable for natural, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures.
BulletPoint3 : Rated Inlet Pressure: 2 psi (13.8 kPa) / Maxitrol Rated: 10 psi (69 kPa)
BulletPoint4 : Ambient Temperature Ranges: -40 to 205°F (-40 to 96°C)
BulletPoint5 : Capacity: 600,000 Btu/h
ConnectorType : Vent
ExteriorFinish : Aluminum
ItemName : Maxitrol 2 Psi -325-5L -3/4” x 3/4” -Aluminum - Line Pressure Regulators (Suitable for Natural, Manufactured, Mixed Gases, liquefied Petroleum Gases, and LP Gas-air mixtures)
ItemTypeKeyword : welding-gas-regulators
Manufacturer : Maxitrol
Material : Aluminum
ProductDescription : 325-L SERIES Lever Acting Design for 2 psi Piping Systems ? Maxitrol’s 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications. ? The 325 Series features a high leverage linkage assembly to deliver positive dead-end lockup. The regulators are capable of precise regulating control from full flow down to pilot flow.  ? Suitable for multi-positional mounting. If ball check vent limiting device is installed, mount in an upright position only.  Imblue Technology™ 325-3L, 325-5L, 325-7AL, 325-9L models may be ordered with Imblue Technology™. Imblue Technology™ increases corrosion resistance and provides extra protection against the elements for regulators used in outdoor applications. Add suffix letter “B” to model number when ordering.   NOTE: Capacities are used to determine the maximum multiple appliance load. The largest single appliance served by the regulator should not exceed the maximum individual load specified above NOTE: All Maxitrol gas pressure regulators should be installed and operated in accordance with Maxitrol Safety Warning Instructions
ProductSiteLaunchDate : 2021-05-04T20:38:45.565Z
Size : 325-5L-3/4
UnitCount : 1