Cart 2 india

Specification
Brand : GASLAND
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Color : Silver
Color1 : Yellow
Color2 : Gold
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 00850034034003
ExternallyAssignedProductIdentifier1 : 0698253587838
ExternallyAssignedProductIdentifier2 : 698253587838
ExternallyAssignedProductIdentifier3 : 0716352252256
ExternallyAssignedProductIdentifier4 : 0716352021777
ExternallyAssignedProductIdentifier5 : 00716352021777
IncludedComponents : Quick Connects
ItemDisplayWeight : 1.4 pounds
ItemLength : 60 inches
ItemName : Gasland Gas Pressure Regulator, 1/2" NPT In/Out Gas Pipe, 1/2 PSI(3.5 kPa) Gas Inlet, 5"-10" WC Outlet Pressure, Gas Pressure Regulator for Liquefied Propane and Natural Gas, Easy To Install
ItemPackageDimensions_Height : 9.398 centimeters
ItemPackageDimensions_Length : 6.096 centimeters
ItemPackageDimensions_Width : 6.858 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : welding-gas-regulators
Manufacturer : GASLAND
Material : Copper
Material1 : Brass
Material2 : Rubber
MaximumPressure : 4000 pounds_per_square_inch
ModelName : Highcraft GUHD-ZD12-12B
ModelNumber : QW3349
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JKED1
Pattern : Oxygen
ProductDescription : Gasland chef gas pressure regulator has 1" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying. Do not install the regulator too close to the heating equipment or use in very cold environment.

PRODUCT DESCRIPTION

Brand: Gasland chef
Gas type: Natural Gas (NG)
Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar)
Outlet pressure range: 3” - 6” Water Column
Ambient operating temperature range: 32°F - 225°F (0°C - 107°C)
Refer to the pictures on how to find the correct pipe thread size. This regulator has 1/2" openings for 1/2" gas pipes. 1/2" IN and 1/2" OUT Female Pipe Thread. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying.

ATTENTION

NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS
The pipe fittings for this regulator are based on NPT pipe threads - dimensions according ANSI/ASME B1.20.1 standards
Install the regulator properly with gas flowing as indicated by the arrow on the casting
*NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator

KINDLY NOTE

WARNING: The NPT thread size is NOT referring to the size of the thread itself!
The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe
Measuring the pipe will often mislead you into choosing the wrong pipe size
The "pipe thread size" is measured and based on the inside of the pipe
A lot of people measured the thread / the opening for the thread/outside diameter！
ProductSiteLaunchDate : 2018-12-17T08:00:00.000Z
Size : 12 Inch
Style : 1/2 in. MIP x 1/2 in. MIP
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
UnitCount : 1
WebsiteShippingWeight : 0.181 kilograms