Specification Brand : Entatial BulletPoint1 : ✅The initial spring pressure of the 1000 series nitrogen gas spring is 9200N, which is convenient for installation and adjustment. BulletPoint2 : ✅The 1000 series nitrogen gas spring is mainly used for gas compression, with small size, long stroke and stable operation. BulletPoint3 : ✅The piston rod has high hardness after special processing, and the surface roughness reaches about Ra0.02um. BulletPoint4 : ✅The nitrogen gas spring cylinder body has a C shape notch on the upper and a U shape notch on the bottom with M8 screw holes, which is easy to install. BulletPoint5 : ✅Adopting the overall cutting process and the use of alloy material, is safer and more than pipe welding. Color : X170-015 ExternallyAssignedProductIdentifier : 7319626097251 ExternallyAssignedProductIdentifier1 : 840126303254 ExternallyAssignedProductIdentifier2 : 0840126303254 IncludedComponents : 164-10 ItemDisplayDimensions_Height : 3 inches ItemDisplayDimensions_Length : 15 inches ItemDisplayDimensions_Width : 12 inches ItemDisplayWeight : 4 pounds ItemName : Gas Compressed Springs, Standard Size Nitrogen Spring Cylinder 1000 Series High Hardness with M8 Screw Holes for Industrial Stamping(YX1000-032) ItemPackageDimensions_Height : 3 inches ItemPackageDimensions_Length : 15 inches ItemPackageDimensions_Width : 12 inches ItemPackageQuantity : 1 ItemTypeKeyword : welding-gas-regulators Manufacturer : Entatial Material : Other ModelName : 164 ModelNumber : 164-10 NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : Entatial6q14ztkfi92101-15 ProductDescription : Feature: 1. The 1000 series nitrogen gas spring is mainly used for gas compression, with small size, long stroke and stable operation. 2. The nitrogen gas spring cylinder body has a C shape notch on the upper and a U shape notch on the bottom with M8 screw holes, which is easy to install. 3. The initial spring pressure of the 1000 series nitrogen gas spring is 9200N, which is convenient for installation and adjustment. 4. The piston rod has high hardness after special processing, and the surface roughness reaches about Ra0.02um. 5. Adopting the overall cutting process and the use of alloy material, is safer and more than pipe welding.
Specification: Item Type: Nitrogen Gas Spring Material: Alloy Purpose: Die compression nitrogen cylinder Cylinder Diameter: Approx. 50.2mm / 2in Plunger Diameter: Approx. 28mm / 1.1in
Package List: 1 x Nitrogen Gas Spring 1 x Storage Box
Note: 1. Do not use the nitrogen gas spring plunger rod for fixing, and the threaded hole at the end of the piston rod cannot be used as a lifting hole for lifting. 2. Do not modify the following aspects of the nitrogen gas spring: (1)Drill holes on the cylinder block of the nitrogen gas spring, the sealing ring, etc. (2)The piston rod is shortened in order to reduce the stroke (3)Do not perform other processing on the nitrogen gas spring and its accessories 3. Do not use nitrogen gas springs for purposes outside the scope of product catalog specifications. 4. Do not allow the gas spring to return freely after being compressed, as this will cause damage to the internal structure.