Specification Brand : ariarly BulletPoint1 : The temperature measuring ring has a time limit, the temperature it measures is determined by measuring and calculating with the scale after the product has been burned. The temperature level cannot be changed and the product was high quality. BulletPoint2 : For example: thermocouple, temperature ring, thermocouple can only measure the radiant heat of the oven, but not the transfer heat from the oven, so the temperature of the ambient temperature of the product is measured, not the temperature of the product itself. BulletPoint3 : It is widely used to determine the sintering temperature of refractory materials, chemical materials, abrasive materials, magnetic materials, ceramics and other materials in the sintering process. BulletPoint4 : Precise formulas, real material and temperature measurement are more accurate, consist of more than 100 ingredients, similar to ceramic components. BulletPoint5 : The temperature of the product should be measured accurately and effectively during the firing process, but most measurements are limited in space and time. Color : One Color ExternallyAssignedProductIdentifier : 8596387213710 ExternallyAssignedProductIdentifier1 : 0198462827072 ExternallyAssignedProductIdentifier2 : 198462827072 ItemLength : 3.93 inches ItemName : 1230℃ Ceramic Craft Furnace, Fireproof High Temperature Measuring Pyrometer Cone, Electric Furnace Accessories ItemPackageDimensions_Height : 5 centimeters ItemPackageDimensions_Length : 10 centimeters ItemPackageDimensions_Width : 7 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : science-lab-furnaces Manufacturer : ariarly ModelName : ariarlypz6rsu84wg ModelNumber : ariarlypz6rsu84wg NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : ariarlypz6rsu84wg ProductDescription : Specification: Condition: Brand New Item Type: Pyrometric Cone Model: 5# Material: clay Color: As shown Softening temperature: 1230℃ Weight: Approx. 235g Size: approx. 6.5 x 1 cm/2.56 x 0.39 inches Use: 1. Three adjacent temperature measuring cones were taken as a group, the lower cone was the guide cone, the higher cone was the support cone, and the middle cone was the ignition cone 2. Place the bases about 1 cm apart so that the rectangular edges are perpendicular to the floor and tilted at 80° 3. After drying, it is placed in the oven for better observation. The better effect is that the bending angle of the temperature measuring cone should be greater than 20° and less than 100° 4. The temperature measuring cone can also be placed at the bottom, middle and top to measure the temperature difference at different places in the oven 5. The softening temperature of the temperature measuring cone varies due to different heating methods, so the temperature rise must be slow and 10° per minute is appropriate 6. The fireproof mud base should be placed flat. In order to control the sintering temperature more accurately, multiple groups of temperature measuring cones should be selected and multiple observation points should be set up at the same time 7. The base can be kneaded with mud, and then the temperature measuring cone is vertically inserted into the ground and then tilted at 80°
Packing list: 1 x Box of Ceramic Oven Temperature Measurement Cone ProductSiteLaunchDate : 2024-10-05T04:49:27.600Z Size : One Size UnitCount : 1 UnspscCode : 41112200