Cart 2 india

Specification
Brand : Radio Design Labs
BulletPoint : The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface
BulletPoint1 : Dual Generator: This product can generate 0/4 to20mA current and 0 to 10V voltage by rotating a multi cycle precision potentiometer, which can be used as a source to produce output such as valve regulation.
BulletPoint2 : Three Digit Display: Our generator has a bright and clear three digit LED digital display for monitoring output current and voltage. You can switch monitors easily by pressing the switch below the monitor.
BulletPoint3 : Current and Voltage Calibration: Calibration potentiometers with current and voltage displays on the back of the module. If the display is accurate, you can calibrate the display value of the current voltage yourself.
BulletPoint4 : High Accuracy: The LED display of the adapter displays current accuracy to 0.1mA, voltage accuracy to 0.01V, and the operating voltage is DC24V
BulletPoint5 : Wide Applications: Our signal adapters can be used for signal generators, valve regulation, inverter control, PLC commissioning, panel commissioning, LED testing, analog transmitter output.
Color : 1PCS
ExternallyAssignedProductIdentifier : 6973332402108
ExternallyAssignedProductIdentifier1 : 0813721011091
ExternallyAssignedProductIdentifier2 : 813721011091
IncludedComponents : SMLDC02+TB463
ItemName : Radio Design Labs RDL ST-RG1 Ramp Generator - 0 to 10 Vdc Output
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : function-generators
Manufacturer : Radio Design Labs
ModelName : Serounderokg593cvts
ModelNumber : 4330156153
NumberOfItems : 1
PartNumber : ST-RG1
ProductDescription : Control Inputs:1 to ramp up, 1 to ramp downInput Logic:External closure pulls normally low input to +15 Vdc to activate UP or DOWNfunctionIndicator Outputs:1 to drive red LED (partial to fully OFF) 1 to drive green LED (partial to fully ON)LED Output Current:0 to 3 mA (to drive low current, high intensity LEDs)Ramp Output:0 to 10 volts nominal, (typical 9.8 V under ST-VCA2 load)Minimum Step:200 mV nominalRamp Time:5 seconds nominal (fully off to fully on; or fully on to fully off)Power Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 40 mAAmbient Operating Environment:0 C to 55 C
ProductSiteLaunchDate : 2016-03-21T12:58:24.128Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111600