Cart 2 india

Specification
Brand : Hilitand
BulletPoint1 : SIMPLE TO USE: Sine waveform 0.01Hz‑500.00kHz (output amplitude decreases with further increase in frequency), other waveforms 0.01Hz‑100.00kHz (but does not limit the upper limit of the adjustable frequency, so if distortion and jitter requirements are not too high, you can further increase the frequency used).
BulletPoint2 : GOOD PERFORMANCE: This source module has good accuracy and frequency stability, it is also well suited for oscilloscope sweep time factor calibration. Comes with a filter that can be turned on and off to adapt to sine and pulse waveform output.
BulletPoint3 : WIDE USAGE: This DDS generator is used in conjunction with an oscilloscope for electronic circuit testing and debugging, frequency characteristics of sound amplifiers and impulse response testing and measurements. There is a filter (which can be turned on and off) to accommodate sine and pulse outputs.
BulletPoint4 : PACKAGE INCLUDING: The package list has 1 x function generator, 1 x USB power cable, 1 x BNC coaxial cable, 1 x end BNC cable, and 1 x antenna
BulletPoint5 : MULTIFUNCTIONAL: This source generator meter can test a variety of waveforms, such as: sine , , triangle , forward sawtooth , reverse sawtooth and so on. It is specially designed for professional workers. It can be powered by a power or a 3.7V lithium battery(battery not included).
Color : As Shown
ExternallyAssignedProductIdentifier : 7648240059858
ItemName : Function Generator 0.01Hz‑500KHz High Precision Sine Triangle Sawtooth Generator Frequency Module
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : function-generators
Manufacturer : Hilitand
Material : ABS
ModelNumber : Hilitandbecnkswigx
PartNumber : Hilitandbecnkswigx
ProductDescription : Specification:
Item Type: Function Generator
Material: ABS
Size: Approx. 140 x 80 x 26mm / 5.51 x 3.15 x 1.02in
Main Technical Parameters:
Output Waveforms: Sine , , Triangle , Positive Sawtooth , Negative Sawtooth , Electrocardiogram , Exponential Rise, Exponential Fall, Lorenz Pulse, Gaussian Pulse, Sinc Pulse, Half , Full , Noise
Power Supply: DC4-9V (Recommend Using DC5V when using adapter, or 3.7V Lithium Battery when using battery power(battery not included))
Current: 180MA at 5V
Frequency Range: Sine 0.01Hz-500.00kHz, Other Waveforms 0.01Hz-100.00kHz
Resolution: 0.01Hz
Sine Distortion: Output Amplitude: Maximum ±10V (P-P)
Output Impedance: 50 ohm
DC Offset: Maximum ±10V
Can save all set parameters.
Comes with a filter that can be turned on and off to adapt to sine and pulse waveform output.
Features:
Compact size, fully functional, easy to operate and portable. It can be powered by power or 3.7V lithium battery.
Used in conjunction with an oscilloscope, it can be used for electronic circuit testing and debugging, frequency characteristics of sound amplifiers and impulse response testing and measurement. Because of its good accuracy and frequency stability, the DDS is also well suited for oscilloscope sweep time factor calibration.
The output is suitable for oscilloscope attenuator and probe pulse characterization.
There is a filter (which can be turned on and off) to accommodate sine and pulse outputs.


Package List:
1 x Function Generator
1 x USB Power Cable
1 x BNC Coaxial Cable
1 x End BNC Cable
1 x Antenna
ProductSiteLaunchDate : 2024-08-12T17:43:34.409Z
Size : As Shown
UnspscCode : 26111600