Cart 2 india

Specification
Brand : Capormory
BulletPoint1 : HIGH-QUALITY CONVERSION: Our 3.3P-5V module efficiently converts 0-100% PWM of 3.3V level into analog, providing a precise and reliable output of 0-10V voltage.
BulletPoint2 : FREQUENCY RANGE: The PWM Receive Frequency Range of 100HZ-3KHZ (recommended 1-3KHZ) allows for a smooth and efficient conversion process, making this module a reliable choice for your conversion requirements.
BulletPoint3 : WIDE APPLICATION: This module is widely used in interface switching of PLC, single chip, or other industrial control boards, making it a versatile solution for various industrial control applications.
BulletPoint4 : REVERSE POLARITY PROTECTION: Our module features a built-in reverse polarity protection function, ensuring the safety and stability of your devices when connected to the power supply.
BulletPoint5 : EASY INSTALLATION: With 4*M3 screw holes, this module is easy to install and mount, providing a practical and convenient solution for your industrial control needs.
Color : WHITE
ExternallyAssignedProductIdentifier : 9331490398348
IncludedComponents : see details
ItemName : Digital Analog PLC Module, 0-100% PWM to 0-10V Voltage Converter Module, 1-3KHZ Frequency Range, for Industrial Control Board, Reverse Polarity Protection
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : function-generators
Manufacturer : Capormory
MeasurementAccuracy : see details
ModelNumber : SUNGOOYUEf2tegc5x8k
NumberOfItems : 1
PartNumber : Capormory35y4p98zqg
PowerSourceType : See Details
ProductDescription : Specification:
1. Model: 3.3P-5V
Function: Input 0-100% PWM of 3.3V level, output 0-10V voltage
2. PWM Receive Frequency Range: 100HZ-3KHZ (1-3KHZ is recommended)
3. Insert the jump pin at 5V
4. Analog Voltage Output: The following is the output voltage of 0-10V to illustrate
After power-on, when there is no input, the output is 0V
For the first power-up, a calibration can be done: Input a with 50% duty cycle and 3.3V amplitude to DIN- and DIN+. The frequency is 1-3KHZ. Use a multimeter to measure two ports of AO and GND. Adjust the potentiometer on the board to make the multimeter display 5.40V. This calibrate the corresponding relation between pulse and this module. The resolution of this module is 0.1V. The output current capability is 10MA. If the percentage of the duty cycle is inversely related to the voltage, you can check the check box of STEP LOW, ACTIVE to set the pins of PWM output in the MACH3 software.
5. Supply Voltage: 15-30VDC (power requirement of power supply: >100MA), 12V customizable
6. Output Power: About 10MA
7. Mounting Method: 4 * M3 screw hole

Port:
1. DIN+: Positive of PWM (For common cathode, connect it to PWM; For common anode, connect it to 3.3V of terminal)
2. DIN-: Negative of PWM (For common cathode, connect it to GND; For common anode, connect it to PWM )
3. 12-30V: Positive of power supply
4. GND: Ground of power supply
5. GND: Ground of power supply. It is connected to ground of power supply
6. AO: Output port of analog voltage (0-10V)

Package List:
1 * Digital-Analog PLC Module

ProductSiteLaunchDate : 2023-12-08T09:54:13.398Z
Size : C
Style : JDS2900
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 4.4445