Cart 2 india

Specification
Brand : Azuocn
BulletPoint : DC9V 1Hz-65534Hz DDS Function Signal Generator Sine Square Triangle Sawtooth Low Frequency LCD Display USB Cable
BulletPoint1 : Name: AD9833 Programming Serial Interface Module；Dimensions: 17mm × 12mm / 0.66in × 0.47in
BulletPoint2 : This module is capable of generating sine wave, triangle wave, and square wave outputs.
BulletPoint3 : The module is powered by a supply voltage of 2.3V to 5.5V and features a sleep function.
BulletPoint4 : Package Includes: 6PCS AD9833 Modules, each with a header pin.
BulletPoint5 : The module Maximum VOUT: 0.65 V；Minimum VOUT: 38 mV；VOUT Temperature Coefficient: 200°；High Voltage Input: 1.7-2.8V;Low Voltage Input: 0.5-0.7V；Input Current: 10 μA；Input Capacitance: 3 pF
ExternallyAssignedProductIdentifier1 : 0768383220223
ExternallyAssignedProductIdentifier2 : 768383220223
IncludedComponents : header pin
ItemName : 6PCS AD9833 Module Programming Serial Interface DDS Module Sine Wave Signal Generator
ItemPackageDimensions_Height : 0.2 inches
ItemPackageDimensions_Length : 0.2 inches
ItemPackageDimensions_Width : 0.2 inches
ItemTypeKeyword : function-generators
Manufacturer : Azuocn
MeasurementAccuracy : ±0.5%
ModelNumber : ZY-120
NumberOfBoxes : 1
NumberOfItems : 6
PartNumber : ZY-120
ProductDescription :

Description:

The AD9833 is a low-power, programmable module capable of generating sine wave, triangle wave, and square wave outputs. It is required for various types of waveform detection, driving, and time-domain reflectometer (TDR) applications. The output frequency and phase can be programmed via software for easy tuning without the need for external components.

The frequency register is 28 bits wide: with a 25 MHz clock frequency, it achieves a resolution of 0.1 Hz; the clock rate of the AD9833 is 1 MHz, tunable to a resolution of 0.004 Hz.

The AD9833 features a standard serial interface, allowing the device to interface directly with different microprocessors. Data or information is written to the controller device using an external serial clock. The AD9833 is written via a wired serial interface.

This serial interface operates at clock frequencies of up to 40 MHz and is compatible with DSP and microcontroller standards.

The device is powered by a supply voltage of 2.3V to 5.5V and features a sleep function, allowing unused portions of the device to be turned off to minimize current consumption. For example, when generating the output clock, the DAC can be turned off.

Parameters:

Name: AD9833 Programming Serial Interface Module

Dimensions: 17mm × 12mm / 0.66in × 0.47in

Digital Programmable Frequency and Phase: Power consumption at 3V is 12.65 mW

Output Frequency Range: 0 MHz to 12.5 MHz

SPI Interface Lines

Refresh Rate: 25 (maximum)

Maximum VOUT: 0.65 V

Minimum VOUT: 38 mV

VOUT Temperature Coefficient: 200°

High Voltage Input: 1.7-2.8V

Low Voltage Input: 0.5-0.7V

Input Current: 10 μA

Input Capacitance: 3 pF

Operating Temperature: −40°C to +105°C

ProductSiteLaunchDate : 2024-09-04T19:11:41.309Z
SupplierDeclaredDgHzRegulation : not_applicable