Cart 2 india

Specification
Brand : CEMELI
BulletPoint : Thermostats
BulletPoint1 : Independent Channel: Both channels are independent of each other and have phase synchronization function.
BulletPoint2 : Basic Parameters: Sampling rate: 200MSa/S, vertical resolution: 13bit and storage depth: 8k.
BulletPoint3 : Digital Display: 2.4-inch TFT LCD display, 320*240 resolution, with clear graphic interface.
BulletPoint4 : Measurement Mode: The measurement mode has 2 functions, one is a frequency meter, the other is a counter. They measure digital signals from the external input port.
BulletPoint5 : Frequency Meter: The frequency meter is used to measure the frequency. The frequency is measured by equal precise measurement. The coupling and gate time can be set.
Color : One Color
ExternallyAssignedProductIdentifier : 7320431062365
ItemName : 4-Channel 485 to PWM/NPN Signal Output/High-Frequency Square Wave Pulse Signal Generator Modbus
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : function-generators
Manufacturer : CEMELI
ModelName : CEMELI
ModelNumber : CEMELI
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CEMELI
ProductDescription : Thermostats
1. Product Overview
This product is an PWM/NPN signal output module which is output through an RS485 interface.
1)4-channel PWM: frequency range 1HZ-40KHz, duty cycle 0-100.0%.
2)Output voltage:5V/Supply voltage/Open drain output (Jumper selection)
3)Output impedance: 1K Maximum single channel output current 25mA
4) The module adopts RS485 MODBUS RTU standard communication, it can be networked with the host computer software, PLC, industrial touch screen, etc.
5) RS485 communication signal output interface adopts over-voltage and over-current double protection.
Description of communication parameters ( value): 9600,N,8,1
5Restore settings
Open the shell Press the restore button for more than 5 seconds The module will to settings;
The communication parameters : 9600, N, 8, 1
The device address: 1
PWM parameters are not memorized after power failure.
Restore the PWM parameter register to its default value.
ProductSiteLaunchDate : 2024-07-26T09:19:07.804Z
Size : One Size
UnitCount : 1
UnspscCode : 26111600