Cart 2 india

Specification
AutomotiveFitType : universal_fit
AutoPartPosition : inside
Brand : Winsgor
BulletPoint1 : Material: Made of oil resistant tempered glass mirror surface,copper interface,rubber gauge hose.
BulletPoint2 : Function: The Fuel Pressure gauge is used to measure the pressure of the fuel supply system,judge the workin conditions of the electric gasoline pump,oil pressure regulator and other fuel system components.
BulletPoint3 : Application: Compatible with GM 6.6L Duramax engines.
BulletPoint4 : Feature: Equipped with a 3-1/2" gauge reads from 30 inHg to 15 PSI.
BulletPoint5 : Package included: 3-1/2" Gauge Reads ,6ft Hose and quick Coupler.
BulletPoint6 : tester can check the real pressure in the high pressure circuit in common rail system using a high pressure gauge(2000 bar) and high pressure flexible hoses. The kit also includes a set of dummy pump regulator and injector pipe blanks. For a variety of tests: -Engine cranking/running pressure test -Maximum pump pressure test -Pump pressure regulator test -Injector leakage test
Color : Multi
CompatibilityOptions : S60H for 6190/6200/6170
ExternallyAssignedProductIdentifier1 : 755496821775
ExternallyAssignedProductIdentifier2 : 0755496821775
ExternallyAssignedProductIdentifier3 : 0722537897556
ExternallyAssignedProductIdentifier4 : 0643845650865
FitType : Vehicle Specific
Hazmat : auto-grounding
IncludedComponents : Screwed Joint
ItemName : Winsgor Fuel System Test Kit Compatible with TU-32-6 Fuel Pressure Tester 6.6 L GM Duramax Diesel
ItemPackageDimensions_Height : 16.6116 centimeters
ItemPackageDimensions_Length : 7.8994 centimeters
ItemPackageDimensions_Width : 14.3002 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-fuel-pressure-testers
Manufacturer : Winsgor
Material : Steel
MeasurementAccuracy : 0-300 PSI
ModelName : Fuel Pressure Testers
ModelNumber : EODSAD022
NumberOfItems : 1
OperationMode : Mechanical
PackageLevel : unit
PartNumber : Winsgor
ProductDescription : Instruction:
1. Start the engine and turn it to normal operating temperature, turn off the engine and remove all spark plugs after the engine stops running.
2. With the throttle fully open, press the connector of the pressure gauge onto the spark plug hole.
3. Use the motor to drive the engine to rotate at 100-150r/min for 3-5 seconds. At this time, the pointer on the instrument will gradually rise and stop at a certain value, and the indicated value is the compression pressure of the cylinder.
4. Repeat the above steps for 2-3 times to improve the measurement accuracy.
ProductSiteLaunchDate : 2023-03-08T10:59:09.319Z
Size : 8000 psi
Style : S60H
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25191800