Cart 2 india

Specification
Brand : RESKIU
BulletPoint : IGNITER TESTER - 12VDC
BulletPoint1 : ✔【 COMMON RAIL INJECTOR TESTER】The common rail injector tester is an easy-to-use tool that can perform the test using the injectors' hand pumps. Small and light, it could meet the needs of DIY enthusiasts for a simple tester.
BulletPoint2 : ✔【TEST AREA】It can simulate the drive signal of the ECU to the fuel injector, e.g. B. pilot injection, relief point, full load point and other conditions.
BulletPoint3 : ✔【EXCELLENT WORKMANSHIP】The common rail injector tester uses an imported PWM control chip, which can be used for various working conditions of the injector. with digital display panel, convenient operation and good test effect.
BulletPoint4 : ✔【EASY TO OPERATE】Using the traditional nozzle tester, it can meet the needs of detecting common rail injectors and effectively reduce maintenance equipment costs.
BulletPoint5 : ✔【APPLICABLE MODELS】Diesel engine vehicle. These diesel injector testers are suitable for all types of diesel injectors except common rail (CRDI) diesel injectors.
BulletPoint6 : Multiple Software Support: Compatible with various software like ECOM, ICOM, INPA, ISIS, and ISTA Rheingold, offering you unparalleled flexibility in vehicle module management.
BulletPoint7 : Satisfied Service & What’s included : 1* ENET Ethernet cable. XINXXR OBD2 Enet cable for BMW offers 180days no-excuses refund and 3years aftermarket service.If you have any questions, please reach out to us, and we will get back to you within 24 hours.
Color : White
CompatibleDevices : Diagnostic Tools (ECOM, ICOM, INPA, ISIS, ISTA Rheingold)
ConnectorGender : Male-to-Female
ConnectorType : Rj45, 16-pin Obd, Micro Usb
CustomerPackageType : Standard Packaging
EthernetCableCategory : cat_5e
ExternallyAssignedProductIdentifier : 7545692362768
ExternallyAssignedProductIdentifier1 : 816689020181
ExternallyAssignedProductIdentifier2 : 0816689020181
IncludedComponents : KKL 409
ItemName : RESKIU Injector Tester Kit, Multifunction Diesel Injector Tester, Common Rail Injector Tester, Nozzle S60H 220V, Injection Tool, for Electromagnetic Injectors
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 58 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-fuel-pressure-testers
Manufacturer : RESKIU
ModelName : KKL-409
ModelNumber : AKLOSIPYs8qyf6ecr0-12
NumberOfItems : 1
NumberOfPins : 16
PartNumber : Common Rail Injector Tester Kit
ProductDescription : Specifications:
v Color: Black
v Measuring ranges: 0 to 600 bar & 0 to 8000 PSI
v Pressure range: 60Mpa (600 bar)
v For 6190/6200/6170 Diesel
v Can test pressure: ≥35.0MPa (350 bar)
v Fuel tank capacity: 4000mL
v Oil Cup：0.8L
v Pressure: 0-60Mpa
v Plunger Hole: 2/5''
v Nozzel connector: M14X1.5-M14X1.5, M14X1.5-M12X1.25, M14X1.5-M12X1.5
v Applicable models: Diesel engine vehical


Functions:
v For testing injection nozzle opening pressure &chattering.
v Leakage test & spray pattern.
v Atomization & chatter characteristic tests.
The nozzle tester consists of:
v Three-way shut-off valve.
v Stainless steel, heavy gauge(100 mm Dial, 3/8 " BSP thread).
v Measuring ranges: 0 to 600bar & 0 to 8000 PSI.
Standard accessories:
v Handle with handle;
v High pressure pipes 'A' and 'B' type with m.m. size nuts (12 X 1.5) and (14 X 1.5) for connections;
v O-rings-1 flat ring.

Package for S60H :

Main Machine * 1pcs
Fuel Bar * 3pcs
Accessories * 1sets
Manual * 1
Package for CR-C :
CR-C Main Unit Machine * 1pcs
Main Test Cable * 1pcs
For Bos-ch Connector *1pcs
For Del-phi Connector * 1pcs
For Den-so Connector * 1pcs
Cable Clip connector* 1pcs
ProductSiteLaunchDate : 2024-09-09T15:48:24.058Z
RecommendedUsesForProduct : Automotive, BMW vehicle module programming
SpecificationMet1 : IEEE
SpecificationMet2 : TIA
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25191800