Cart 2 india

Specification
Brand : weyleity
BulletPoint1 : 【Pressure Gauge with Regulator and Relief Valve】The turbo boost keak tester is equipped with a 0-6bar (0-87psi) pressure gauge, making it easy for you to see the system pressure at a glance. The gauge is fitted with a pressure regulator, which can be adjusted by pulling up and rotating to the required pressure, and locked by pressing down. Turbo leak pressure boost leakage detector tool set is also equipped with a pressure relief valve to prevent overpressurisation.
BulletPoint2 : 【Quickly Locate Leaks】The turbo charger air pressure leakage tester kit is designed to accurately detect and locate leaks in the turbocharger, cooling system and emissions system of most cars and light trucks. Whether you're concerned about loss of boost pressure, coolant leaks, or suspect a turbocharger problem, it's the ideal solution. By finding leaks in a timely manner, you can restore your vehicle's performance, improve fuel efficiency, and extend engine life.
BulletPoint3 : 【Four Pairs of Step Adapters with Good Sealing Performance】The adapters of this boost leak tester have a stepped design, each adapter contains three different sized steps for different sizes of turbocharger, cooling or exhaust/emission system pipes. The adapters are made of high quality rigid nylon and metal material, which can be firmly installed on different pipes to ensure good sealing performance. The adapters range in outside diameter from: 1.38''/35mm, 1.57''/40mm, 1.77''/45mm; 1.97''/50mm, 2.17''/55mm, 2.36''/60mm; 2.56''/65mm, 2.76''/70mm, 2.95''/75mm; 3.15''/80mm, 3.35''/85mm, 3.54''/90mm.
BulletPoint4 : 【Easy Operation】Insert the appropriate adapters into the system's air inlet and exhaust ports and adjust the pressure regulator knob to set the desired pressure. Connect the pressure gauge to the air inlet adapter and then to a shop air source to pressurise the system. Once pressurised, you can watch the gauge to see if it maintains pressure and listen for any leaks. If the pressure drops, you can easily locate the leak by hand or spray.
BulletPoint5 : 【Caution】Excessive pressure may cause damage to system components. Most vehicle turbocharging systems are designed to handle a maximum pressure of approximately 15psi (1bar) to 25psi (1.7bar). Vehicle coolant systems are generally rated for 15psi. Turbo boost leak tester equipped with 3 air tittings (US, European, and Asian Types). Always consult the vehicle manufacturer's specifications for accurate information.
Color : Black
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier1 : 019495103417
ExternallyAssignedProductIdentifier2 : 0019495103417
ExternallyAssignedProductIdentifier3 : 00019495103417
FitType : Vehicle Specific Fit
GpsrSafetyAttestation : 1
Hazmat1 : DANGEROUS GOODS IN APPARATUS
Hazmat10 : DE_Unregulated
Hazmat11 : EG_Unregulated
Hazmat12 : ES_Unregulated
Hazmat13 : FR_Unregulated
Hazmat14 : GB_Unregulated
Hazmat15 : IN_Unregulated
Hazmat16 : IT_Unregulated
Hazmat17 : JP_Unregulated
Hazmat18 : MX_Unregulated
Hazmat19 : NL_Unregulated
Hazmat2 : UN3363
Hazmat20 : PL_Unregulated
Hazmat21 : SA_Unregulated
Hazmat22 : SE_Unregulated
Hazmat23 : SG_Unregulated
Hazmat24 : TR_Unregulated
Hazmat25 : US_Unregulated
Hazmat26 : ZA_Unregulated
Hazmat3 : 9
Hazmat4 : AE_Unregulated
Hazmat5 : AU_Unregulated
Hazmat6 : BE_Unregulated
Hazmat7 : BR_Unregulated
Hazmat8 : CA_Unregulated
Hazmat9 : CN_Unregulated
IncludedComponents : 1
ItemName : weyleity Turbo System Leakage Tester Kit | 12-Piece Turbo Boost Leak Tester with 4 Pairs of 1-3/8" to 3-1/2" Stepped Adapters, Turbo Pressure Leakage Tester for Cooling Emissions Exhaust Pipes
ItemPackageDimensions_Height : 38.608 centimeters
ItemPackageDimensions_Length : 13.0048 centimeters
ItemPackageDimensions_Width : 34.8996 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-fuel-leak-detectors
Manufacturer : weyleity
Material : Plastic
ModelName : Turbo System Leakage Tester Kit
ModelNumber : MS-0822-01
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : 4B1605; ESM1015; LDP04; VDP04; 4891 420 AA
OperationMode : Mechanical
PackageLevel : unit
PartNumber : MS-0822-01
PartTypeId : 12040
ProductDescription :
Turbo System Leakage Tester Kit

Features:

Effortless Turbo System Leak Detection:
Ensure peak performance of your turbocharged vehicle with our Turbo System Pressure Leak Tester Kit. Designed to help you quickly and accurately detect leaks in turbocharger systems, cooling systems, and emissions systems, this tool is essential for maintaining your vehicle's efficiency and power. By promptly identifying leaks, you can restore lost boost pressure, improve fuel efficiency, and prevent engine damage.
Versatile Fit with Stepped Adapters:
This kit comes equipped with 4 pairs of stepped adapters, each featuring 3 size steps to securely fit hoses of various diameters. The adapters cover a wide range of sizes from 1-3/8"" to 3-1/2"" (35mm to 90mm), making it compatible with most cars and light trucks. Whether you're working on turbocharger pipes, cooling systems, or exhaust systems, these adapters provide a reliable seal and versatile application.
Precision Pressure Control:
The kit includes a 0-6bar (0-87psi) pressure gauge, allowing you to monitor system pressure with ease. The pressure regulator is adjustable—simply pull up and rotate to set the desired pressure, then press down to lock it in place. A built-in pressure relief valve automatically prevents over-pressurization, protecting your vehicle's components.
Easy Operation for Quick Results:
Using the turbo leak tester is simple: plug the appropriate adapters into the system, connect the pressure gauge, and use the regulator to pressurize. If the gauge shows pressure loss, you can easily locate leaks by listening for air escaping or using a leakage spray. This user-friendly tool streamlines the troubleshooting process, saving you time and effort.

Specifications:

Mode: ‎Turbo System Leakage Tester Kit
Weight: 5.94 pounds
Product Dimensions: ‎14.17 x 13.19 x 4.72 inches

Package List:

1 x Pressure Gauge with Shut-off Valve and Pressure Regulator
4 Pairs of Stepped Adapters (35mm - 90mm)
3 x Air Fittings (US, European, and Asian Types)

Step to Use:

1.Select the proper adapters and fit them onto the hoses to be checked.
2.Turn the ball valve & regulator knob to set your desired pressure.
3.Connect the pressure gauge to your compressed air equipment.
4.Start charging your system with air and listen for any signs of a leak.

Notice:

Excessive pressure may cause damage to system components. Most vehicle turbocharging systems are designed to handle a maximum pressure of approximately 15psi (1bar) to 25psi (1.7bar). Vehicle coolant systems are generally rated for 15psi. Always consult the vehicle manufacturer's specifications for accurate information.etc

ProductSiteLaunchDate : 2012-07-01T12:00:00.000-08:00
StreetDate : 2015-06-05T00:00:01Z
Style : Gerotor
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25191800
WarrantyDescription : 6 months