Working theory: Low oxygen combustion Power supply: DC 12V battery Air pressure output: Built-in air pump Rated Output pressure: <10psi Rated output flow: <5L/min Rated power: 50W Product weight: 1.5kg Gross weight: 2.5kg
Full system diagnostics:
Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage. Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power. Car Sealing Test: Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc. Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system. Turbo Test: The leakage of coolant would cause the engine to report high water temperature.Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling. Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
Cautions
1. When you use this Car Smoke Leak Detector for the first time, fill it with 10ml baby oil. Please be careful NOT to beyond this range. 2. The testing liquid: both liquid paraffin and baby oil are OK. 3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time. 4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 5. During the process of leak detection, please keep away from smoke-sensitive parts. 6. Do NOT run the detector over 8 minutes continuously. It needs interval rest. 7. The round part of this detector has temperature, please be careful to avoid burns. 8. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. 9. Follow the instructions ProductSiteLaunchDate : 2024-06-20T06:45:24.402Z Size : Four interfaces StreetDate : 2015-06-05T00:00:01Z Style : Fuel Leak Detector SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnitCount : 1 UnspscCode : 46191500 WarrantyDescription : Limited Lifetime Warranty