Cart 2 india

Specification
Brand : NDNCZDHC
BulletPoint : This item is used and in working condition.
BulletPoint1 : Frequency Conversion: The module converts a 0-1KHz frequency pulse to a 0-10V analog voltage.
BulletPoint2 : Interface Compatibility: It facilitates interface conversion between PLC and frequency converter or matching control between motion control card and frequency converter.
BulletPoint3 : Direct Input Capability: Input pulse levels of 5/12/24V can be directly input without resistance, with a minimum input frequency duration of 0.5 seconds.
BulletPoint4 : Quality Components: All parts of the converter module are carefully selected for durability and high quality.
BulletPoint5 : Stability and Performance: The module operates with stability and delivers exceptional performance.
FinishType : Finish
IncludedComponents : inc
ItemName : NDNCZDHC FV-1KHz10V DC to DC Frequency to Voltage Converter Module 0~1Khz to 0~10V Converter Module 1.77x1.85x0.67in Digital to Analog Converter Module
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-transducers
Manufacturer : NDNCZDHC
Material : Copper
ModelName : Fafeicyab73shi9ek
ModelNumber : Fafeicyab73shi9ek
NumberOfItems : 1
OutputVoltage : 5 volts
OutputVoltage1 : 12 volts
OutputVoltage2 : 5 volts
PartNumber : NDNCZDHCrezut8oy4d
PowerSourceType : PowerSource
ProductDescription : Features:
The 0-1KHz frequency pulse is converted into a 0-10V analog voltage by this module. The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter. Input pulse of 5/12/24V can be directly input without resistance.But input frequency should maintain more than 0.5 seconds. All parts of the converter module are well-selected of good durability and high quality. The module is stable and has great performance while using.
Specification: 
Item Type:Frequency to Voltage Converter Module
Size:4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in
Relationship,Linearity:
100Hz to 1V
0.5Khz to 5V
1Khz to 10V

Package List:
1 x Converter Module

Note:
1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Power converter.
At 24 levels, the power supply needs to be powered by 24VDC
3. The input end is isolated by diaphragm. Guaranteed anti-interference ability.
4. If you need to use PLC, support NPN type. Must have a ground wire.
5, if you need to use the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds.
6, frequency and voltage conversion module, response time is about 0.3-0.5 seconds.



ProductSiteLaunchDate : 2024-03-11T11:22:02.860Z
Size : ADE-25 High Linearity Low Noise Passive Mixer
UnspscCode : 27110000
WarrantyDescription : Manufacturer warranty for 90 day