Cart 2 india

Specification
Brand : gernie
BulletPoint1 : Features: Convert the 0-200 Hz frequency pulse into an analog voltage of 0-10V/0-5V. Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion.
BulletPoint2 : The input pulse level of 5V 12V 24V can be directly input, without string resistance. However, the input frequency should be maintained for more than 0.5 seconds.The output current is 5mA.
BulletPoint3 : The on-board multiturn potentiometer is used for calibration correspondence between frequency and voltage.
BulletPoint4 : Convert the 0-200 Hz frequency pulse into an analog voltage of 0-10V/0-5V.
BulletPoint5 : Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion.
ExternallyAssignedProductIdentifier : 7021653284756
ItemName : gernie Frequency to Voltage Converter Module Frequency (FVS-200Hz10V), gerniexcie70bqg3-02
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : frequency-transducers
Manufacturer : gernie
Material : Plastic
ModelNumber : gerniexcie70bqg3-02
OutputVoltage1 : 12 volts
OutputVoltage2 : 5 volts
PartNumber : gerniexcie70bqg3-02
ProductDescription : 1. Features: Convert the 0-200 Hz frequency pulse into an analog voltage of 0-10V/0-5V. Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion.2. Convert the 0-200 Hz frequency pulse into an analog voltage of 0-10V/0-5V. 3. Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion.4. The input pulse level of 5V 12V 24V can be directly input, without string resistance. However, the input frequency should be maintained for more than 0.5 seconds.The output current is 5mA.5. The on-board multiturn potentiometer is used for calibration correspondence between frequency and voltage.Specification:Features:Convert the 0-200 Hz frequency pulse into an analog voltage of 0-10V/0-5V. Can be used for interface conversion between PLC and inverter or the motion control card and the inverter and other interfaces match the control occasion. The input pulse level of 5V 12V 24V can be directly input, without string resistance. However, the input frequency should be maintained for more than 0.5 seconds.The output current is 5mA. The on-board multiturn potentiometer is used for calibration correspondence between frequency and voltage. The optical isolate is used to ensure the anti-interference ability of the input. Input power supply voltage range is 12-30 VDC, recommended supply voltage 15-24 VDC.When at 12V level, the power supply can not use 12VDC power supply, at least 15 VDC power supply, if a certain need to use 12V power supply, can also be customized 12VDC power supply converter. When at 24V level, the power supply need to use 24VDC power supply.Specification:Item Type:Frequency to Voltage Converter ModuleSize:7.3 x 5 x 2.8cm / 2.87 x 1.97 x 1.1in Model
ProductSiteLaunchDate : 2024-04-22T17:42:26.852Z
Size : FVS-200Hz10V
UnitCount : 1
UnspscCode : 46171600
Voltage : 30 volts