Cart 2 india

Specification
Brand : gernie
BulletPoint : landscape-lighting-transformers
BulletPoint1 : Versatile Interface Options Ideal for bridging PLC and frequency converter connections or synchronizing motion control card with frequency converter.
BulletPoint2 : Efficient And Stable: Using efficient and stable conversion technology, it can achieve frequency and voltage conversion and provide stable and reliable working results.
BulletPoint3 : Direct Pulse Input: Supports direct input of 5V, 12V, and 24V pulsewithout string resistance. Output current is 5mA, with a minimum required inputfrequency of 0.5 seconds.
BulletPoint4 : Calibration: The multi coil potentiometer on the board allows for accurate calibration of the frequency to voltage relationship.
BulletPoint5 : Input pulse level of 5V 12V 24V can be input directly without string resistance.But the inputfrequency, to maintain more than 0.5 seconds, the output current is 5mA.
Color : One Color
ExternallyAssignedProductIdentifier : 7903687204224
ItemName : Frequency to Voltage Converter Module for Inverter, Potentiometer 12V Ball Switch Frequency
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-transducers
Manufacturer : gernie
Material : Copper
MaximumFrequency : 1 KHz
ModelName : FTVOGUEyfbx2gor9q
ModelNumber : gernie67yi0fpa39
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : gernie67yi0fpa39
ProductDescription : 1. The 0-3KHz frequency pulse is converted into a 0-10V analog voltage by this module.
2. The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
3. Input pulse level of 5V 12V 24V can be input directly without string resistance.But the input frequency, to maintain more than 0.5 seconds, the output current is 5mA.
4. The multi-coil potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
5. The optical isolate is used to ensure the anti-interference ability of the input.

Spec:
Features:
The 0-3KHz frequency pulse is converted into a 0-10V analog voltage by this module.
The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
Input pulse level of 5V 12V 24V can be input directly without string resistance.But the input frequency, to maintain more than 0.5 seconds, the output current is 5mA.
The multi-coil potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
The optical isolate is used to ensure the anti-interference ability of the input.
Specification:
Item Type:Frequency to Voltage Converter Module
Size:4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in
Relationship,Linearity:
300Hz to 1V
1.5Khz to 5V
3Khz to 10V
Package List:
1 x Converter Module
Note:
For use with PLC, support for NPN type. Must have a ground wire.
If you need to use an encoder, you need to keep the encoder running at a constant speed for more than 0.5 seconds.
Frequency and voltage conversion module, response time is about 0.3-0.5 seconds.
If the input is , etc., due to matching, an 817 diaphragm and a resistor must be
ProductSiteLaunchDate : 2024-04-09T12:54:23.444Z
Size : One Size
UnitCount : 1
UnspscCode : 39121000