Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : Convert the 0-500 Hz frequency pulseinto an analog voltageof 0-10V. Can be used for interface conversion between PLC and inverter. Or the motion control card and the inverter and other interfaces match the control occasion.
BulletPoint2 : The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC,at least 15VDC power supply is required. When the 24V level is used, th
BulletPoint3 : Theinput end is isolated by diaphragm. Guaranteed anti-interference ability.
BulletPoint4 : The input pulse level of 5V 12V 24V can be directly input, without string resistance. However, the inputfrequency should be maintained for more than 0.5 seconds.The output current is 5mA.
BulletPoint5 : The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
Color : #128
IncludedComponents : No
ItemName : 500Hz 10V Module, Frequency to Voltage Converter Module 0~500Hz to 0~10V with Shell, 5mA Output Current for PLC Inverter Interface, Power Converters
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-transducers
Manufacturer : Garosa
Material : metal
MaximumFrequency : 500 hertz
MinimumFrequency : 50 hertz
ModelName : Garosa4v85xk6tzg
ModelNumber : Garosavqge73gbtp
NoiseLevel : 0.03 decibels
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Garosavqge73gbtp
PowerSourceType : Corded Electric
ProductDescription : Specification:
Item Type:Frequency to Voltage Converter Module
Model:FVS-500Hz10V
Conversion:0~500Hz to 0~10V
Output Current:5mA
Size:7.3 x 5 x 2.8cm / 2.87 x 1.97 x 1.1in
Correspondence Relationship(Linearity)
50Hz converted to 1V
Convert 250Hz to 5V
Convert 500Hz to 10V

Package List:
1 x Converter Module with Shell

Note:
If you need to use PLC, support NPN type. Must have a ground wire.
If you need to use with the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds.
Frequency and voltage conversion module, response time is about 0.3-0.5 seconds.
If theinput isflow, etc., due tomatching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function.
Correspondence in use If there is a deviation, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we have adjusted the F/v potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself.

ProductSiteLaunchDate : 2024-06-17T14:25:02.863Z
UnitCount : 1
UnspscCode : 39121000
Voltage : 5 volts
WarrantyDescription : Manufacturer warranty for 90 day.