Cart 2 india

Specification
Brand : PXRZXBICQ
BulletPoint : Amplifiers / Instrumentation
BulletPoint1 : Relay
BulletPoint2 : JDM9-4 JDM9-6 4/6-digit Digital Counter Relay Accumulation Power Outage Memory Reset PNP Sensor DC24V AC220V AC380V
Color : JDM9-6 AC380V
ExternallyAssignedProductIdentifier : 7320467820472
ItemName : JDM9-4 JDM9-6 4/6-digit Digital Counter Relay Accumulation Power Outage Memory Reset PNP Sensor DC24V AC220V AC380V(JDM9-6 AC380V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-counters
Manufacturer : PXRZXBICQ
ModelName : PXRZXBICQ
ModelNumber : PXRZXBICQ
NumberOfItems : 1
PartNumber : PXRZXBICQ
ProductDescription : Relay
Counter if sensor counting is used, Sensor (photoelectric switch or proximity switch) with the model specifications for PNP, DC 6V ~ 36V.Please contact customer service if you need a switch
Model: JDM9-4 / JDM9-6
Counting digits: 4 digits / 6 digits
Counting range: 1~9999 1~999999
Preset method: dial switch
Counting method: add/subtract counting
Counting signal: contact signal/pulse voltage signal (sensor)
Counting speed: 30 times/second 30CPS
Contact capacity: AC220V 5A (resistive load)
Mechanical life: 1 × 10
Rated voltage: DC24V, AC220V, AC380V
Overall dimensions: 78 × 78× 126mm
Opening size: 71 × 71mm

Instructions for use:
The allowable fluctuation range of power supply voltage of 7.1 counter is 85% ~ 110% of the rated value, and the peak ripple coefficient of DC voltage is not more than 5%.
If the count signal is input, the device with good contact reliability should be selected; the width of the pulse voltage signal should be greater than or equal to 10ms. Duty ratio 1: 1, voltage range 5V ~ 30V. The counter should be turned on or " reset " 50ms after the input count signal, otherwise the count may be unstable, The duration of the external reset signal should be greater than 50 ms.
In the counting process, should not toggle the counter finger wheel switch, if you want to reset the number, you should first reset the counter.
Counter Counting Signal and Reset Signal Input Connection Line should use double shield line, The shielding layer should be grounded at the signal input near the counter, and the connecting wire should not be too long. Counter should avoid sharing a power cord with motor, electromagnet and other large inductive load.
counter if sensor counting is used, Sensor (photoelectric switch or proximity switch) with the model specifications for PNP, DC 6V ~ 36V.
ProductSiteLaunchDate : 2024-05-25T09:48:31.119Z
Size : One Size
UnitCount : 1