Cart 2 india

Specification
Brand : Utoolmart
BulletPoint1 : 【Dimension】-Drilling diameter:53mm / 2.09-inch;Total length: 80mm / 3.15-inch;Shank diameter: 9mm / 0.35-inch. Round shank, cemented carbide cutter and high-quality carbon structural steel (45# steel) body.
BulletPoint2 : 【Features】-Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation.
BulletPoint3 : 【Application】- Suitable for drilling holes in low-hardness woods such as density boards, pressed boards, plastics, and hard woods.
BulletPoint4 : 【Application Range】-Suitable for bench drill, vertical drilling machine, hand held electric drill, impact drill, CNC carving machine and other drill press.
BulletPoint5 : 【Warm Tips】-Can not be used for cutting metal holes. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits.
Color : Pink
FinishType : Silver
ItemName : Utoolmart Forstner Drill Bits 53mm, Tungsten Carbide Wood Hole Saw Auger Opener, Woodworking Hinge Hole Drilling Boring Bit Cutter Silver Grey 1Pcs
ItemPackageDimensions_Height : 11.7094 centimeters
ItemPackageDimensions_Length : 5.1054 centimeters
ItemPackageDimensions_Width : 10.8966 centimeters
ItemTypeKeyword : forstner-bits
Manufacturer : Utoolmart
Material : Hard Alloy
Material1 : Carbide
Material2 : Alloy Steel
NumberOfItems : 1
NumberOfPieces : 5
PartNumber : Utoolmart
ProductDescription : Utoolmart Forstner Drill Bits Tungsten Carbide Wood Hole Saw

Technical Parameters
Drilling dia:53mm / 2.09"
Total length:80mm / 3.15"
Shank diameter:9mm / 0.35-inch
Color:Silver Grey
Shank type:Round shank
Material:Cemented carbide;45# steel

Product Feature
1.Can be used for wood product perforation,installation of spherical door locks,drawer locks,hard plastic products,etc.Dedicated to wood board opening and mounting hinges.
2.When positioning the drill,please wait a moment and then drill slowly.
3.If there is any abnormality or chip removal during operation,please stop working immediately and clean the debris before continuing the drilling operation.

Instructions for woodworking hole opener
1.Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work.
2.Keep the vertical angle with the workpiece when working. After the hole opener drills through the workpiece, the workpiece should be withdrawn while the hole opener is rotating. Please clean the sawdust in time to avoid opening failures during continuous work.
3.Workers should wear corresponding protective equipment when working to protect them from working safely, and apply rust oil after use to extend the service life.

Package Content
1 x Hole Opener
ProductSiteLaunchDate : 2022-01-10T07:27:31.253Z
Size : 18*120mm
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Steel,Wood
UnitCount : 1
UnspscCode : 27112700