Cart 2 india

Specification
Brand : Fisch
BulletPoint1 : Forged design with centre point, peripheral cutting, 2 cutting edges and offset cylindrical shaft with 3 surfaces in premium quality.
BulletPoint2 : For drilling tear-free, dimensionally stable blind holes, for edge drilling as well as for oblique holes in soft and hard woods.
BulletPoint3 : By optimising the cutting edges, the Black Shark is even faster, more aggressive and sharper than any other Forstner drill bits worldwide.
BulletPoint4 : Fast and precise drilling with little effort, significantly reduced friction.
BulletPoint5 : Three-face shank avoids the drill bit spinning in the chuck.
Color : Silver
ExternallyAssignedProductIdentifier : 9002696365723
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : no
ItemDisplayDimensions_Length : 8 centimeters
ItemName : Black Shark Pro Forstner Drill Bit Diameter 60 mm, Length 88 mm, Shank 10 mm with 3 Surfaces
ItemPackageDimensions_Height : 29.5 centimeters
ItemPackageDimensions_Length : 10.8 centimeters
ItemPackageDimensions_Width : 12.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : forstner-bits tools
Manufacturer : Johann Eberhard Ges.m.b.H
Material : Tool steel
Material1 : Carbide
Material2 : Alloy Steel
ModelNumber : 031BS06000
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 031BS06000
ProductDescription : Utoolmart Forstner Drill Bits Tungsten Carbide Wood Hole Saw 23mm Gray

Technical Parameters
Drilling dia: 23mm / 0.91"
Total length: 80mm / 3.15"
Color: Gray
Shank type: Round shank
Material:Cemented carbide;45# steel

Product Feature
*Can be used for wood product perforation,installation of spherical door locks,drawer locks,hard plastic products,etc.Dedicated to wood board opening and mounting hinges.
*When positioning the drill,please wait a moment and then drill slowly.
*If there is any abnormality or chip removal during operation,please stop working immediately and clean the debris before continuing the drilling operation.

Instructions for woodworking hole opener
1. Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work.
2. Keep the vertical angle with the workpiece when working. After the hole opener drills through the workpiece, the workpiece should be withdrawn while the hole opener is rotating. Please clean the sawdust in time to avoid opening failures during continuous work.
3. Workers should wear corresponding protective equipment when working to protect them from working safely, and apply rust oil after use to extend the service life.

Package Includes
1 x Hole Opener
ProductSiteLaunchDate : 2020-01-09T17:32:41.430Z
Size : Ø 60 mm
Style : Black Shark Pro Forstner Drill Bit
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Wood
UnitCount : 1
UnspscCode : 27110000