Cart 2 india

Specification
Brand : COZONY
BulletPoint : Forklifts
BulletPoint1 : PALLET HANDLING - Forklift blade extensions are helpful when dealing with specialized or oversized pallets that do not fit within the confines of standard forks. They provide the necessary support to safely handle materials like lumber, sheet metal, or machinery.
BulletPoint2 : EFFORTLESS INSTALLATION- The steel retaining strap keeps fork extensions from sliding off to improve security during use and avoid accidents. In addition, this set of equipment requires no tools for easy installation.
BulletPoint3 : ROBUST QUALITY - Manufactured by alloy steel material with a powder-coated surface, the extension has the advantage of high strength, stability, and rust resistance, prolonging its service life.
BulletPoint4 : EXTENSIVE APPLICATION - It is widely applicable to the forklift truck to move large and heavy loads in the farming job, warehouse, express delivery, factory workshop, construction site, etc.
BulletPoint5 : INCREASED LOAD CAPACITY - Heavy-duty forklift blade extensions provide additional support and stability when lifting heavier and bulkier loads by extending the length of the forklift forks.
Color : Red
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 7320464082224
ExternallyAssignedProductIdentifier1 : 0198723840130
ExternallyAssignedProductIdentifier2 : 198723840130
IncludedComponents : 1 Pair of Fork Extensions
ItemName : COZONY 1 Pair Forklift Extension, 72 Inch Length & 5.5 Inch Inner Width, Heavy Duty Steel Pallet Fork Extension for Forklift Truck
ItemPackageDimensions_Height : 2.76 inches
ItemPackageDimensions_Length : 75.2 inches
ItemPackageDimensions_Width : 8.66 inches
ItemPackageQuantity : 1
ItemTypeKeyword : forklifts
Manufacturer : COZONY
Material : Brass
ModelName : PIS_00X92W5J-72inLfH
ModelNumber : PIS_00X92W5J-72inLfH
NumberOfBoxes : 1
NumberOfItems : 2
PackageLevel : unit
PartNumber : PIS_00X92W5J-72inLfH
PowerSourceType : ac
ProductDescription :

Fork extensions, sometimes called ‘slippers’ or ‘tine extensions’, are attachments that are sleeves that fit over the forks to extend their length. They make a forklift more versatile. For example, as long as the rated capacity isn’t exceeded, they can carry two pallets or they can load or unload from one side of a truck rather than having to switch sides. They are designed for light, bulky loads, not dense, compact loads.

Attaching and removing fork slippers

Follow the manufacturer’s instructions. If there are none, this is the usual way:

Park in a safe and convenient place using safe parking methods (handbrake on, neutral, engine off [if your workplace requires it]) – bear in mind your forklift will be longer after you’ve attached the extensions, so don’t park in a space you won’t be able to get out of.

To put them on, the forks can be level or tilted back slightly and around axle height – they should slide on easily holding them at around a 45-degree angle. If they have loops, slide them along the length of the fork then lower the extension onto the fork (it’s basically a channel that sits over the fork). Check the loops sit behind the heel (where the fork becomes upright). If they have locking pins, they won’t have loops – with these, you can drive the forks into them if they are level. Fasten the locking pins and check that they won’t slide off.

To take them off, raise the forks a bit, tilt the forks forward, undo the locking pin and slide them off. If you either haven’t raised the forks enough or you’ve tilted them forwards too much, the slippers will hit the floor before you can get them off the forks.

Store them in a dry place where they will not be a hazard to pedestrians.

ProductSiteLaunchDate : 2024-09-03T08:52:00.974Z
Size : 5.5" W x 72" L
SkipOffer : 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 30000000