Cart 2 india

Specification
Brand : Bolisila
BulletPoint1 : The digital display has high resolution, fast sampling speed, and easy to use.
BulletPoint2 : Digital display push-pull force meter is a small, simple, multi-functional push and pull test instrument.
BulletPoint3 : N(Newton),Kg (Kilogram) , Lb (Pound) and Oz(Ounce) four units for selection and conversion.
BulletPoint4 : The automatic shutdown time can be set, and the automatic shutdown can achieve a point saving effect.
BulletPoint5 : It is widely used in electronic appliances, construction hardware, pen making Push-pull load, insertion force test, power machinery and other industries.
Color : One Color
ExternallyAssignedProductIdentifier : 8112737506556
IncludedComponents : Tester Rack
ItemName : NK-200 200N Analog Push Pull Force Gauge Dynamometer Measuring Instruments Dynamometer
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : force-gauges
Manufacturer : Bolisila
Material : Aluminum
MeasurementAccuracy : +/-0.5%
ModelName : Bolisila
ModelNumber : Bolisila
NumberOfItems : 1
PartNumber : Bolisila
ProductDescription : Introduction:
Analog Force Gauge with compact size,high accuracy,they are easy to operate and handy to carry out,and can show the unit of newton and kilogram at the same time.The PEAK/TRACK knob of it can switch between the peak value load test and the continuous load testwhich is widely used in electronic appliances, construction hardware, light industrial textiles, insertion force test, power machinery and other industries.
Preparation before test
Choose appropriate joint clamps and install it on the gauge before test.
(1) Pull test
Choose pull clamp and install it on the central stick of marked [PULL].
(2) Push test
Choose push clamp and install it on the central stick of marked [PUSH].
(3) Use of prolong stick
When it isn't possible to touch tested thing, use prolong stick to install clamp.
NOTE:
When testing, tested thing and gauge must be on the same straight line, if not, it isn't possible to test right value of load.
(a) [PEAK] change of [TRACK]
Lightly press knob changing, at the same time, turn it to left to make mark "" be in the place of [TRACK].
(b) [TRACK] change of [PEAK]
Turn knob to right, the knob springs and mark "" is in the place of [TRACK].
(C) Points for attention after testing
After finishing testing, change mark "" , please put it in the place of [PEAK]. If changing knob is put in the place of [TRACK] for a long term, life of inner springs lam in will shorten.
(5) Adjustments of indicator dial
(a) Please confirm whether needle aims at [O] of dial, if not, please turn adjustable circle of dial, and dial will run with it to make needle aimed at [O].
(b) When the machine is vertically placed to use, especially under the condition installing clamp, even don't apply load, needle will be lean, which is the dead weight reason of the machine and clamp. Turn adjustable circle of dial to have [O] aimed at needle, which can't
ProductSiteLaunchDate : 2024-05-31T07:24:15.756Z
Size : One Size
Style : US Plug
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1