Cart 2 india

Specification
Brand : TZZES
BulletPoint1 : 【PARAMETER】Capacity: 100lb | Resolution: 0.5lb | Stroke: 10mm | Accuracy: ±0.5% | Net weight: 1.3kg/2.8lb | Relative moisture: 15%~80%RH.
BulletPoint2 : 【HIGH ACCURACY】The shell of the tension force gauge is made of high-quality ABS plastic, with high strength and good toughness. The pointer dial is convenient for reading, accurate measurement and high precision.
BulletPoint3 : 【VARIOUS ACCESSORIES】Pressure test parts *4, Tenslie test part *1, Extensive shaft *1, which are able to meet most of the experimental requirements. The spring tension scale and various accessories can be put into the carrying case for convenient storage and carrying.
BulletPoint4 : 【PEAK/TRACK】The knob controller on the pull gauge can switch between the peak value load test and the continuous load test. Switching modes according to different experimental occasions can bring great convenience to your experiment.
BulletPoint5 : 【WIDELY APPLICATION】The handheld force gauge is widely applied in pull push load testing industry like electric, high & low voltage electric appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile and insertion force or destructive experiment.
Color : Color
ExternallyAssignedProductIdentifier : 1351330525794
IncludedComponents : See the product description
ItemName : 100lb Push Pull Force Gauge Force Tester Meter with Carrying Case for Tension and Compression Load Plug Force Destructive Tests DL-100LB
ItemPackageDimensions_Height : 65 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 35 centimeters
ItemShape : Rectangular
ItemTypeKeyword : force-gauges
Manufacturer : TZZES
Material : See the product description
Material1 : Stainless Steel
Material2 : Acrylonitrile Butadiene Styrene (ABS)
MeasurementAccuracy : See the product description
ModelNumber : 2024040101
NumberOfItems : 1
PartNumber : TZZES
ProductDescription :

ZERO-TARE BUTTON

The Zero- Tare button allows you to zero the gauge to compensate for measuring attachments and changes in measuring

position.

If the pointer is not in the '0' position, rotate the black outer ring to adjust it so that the pointer points to '0'.

REAL TIME AND PEAK MODE

This button is also the real time/peak hold switch, which you need to press and then rotate to allow you to observe transients or capture peaks.

Continuous Measurement Mode:

Real-time Display of Force Data.

Peak Measurement Mode:

Records Upper Limit Force Data.

ProductSiteLaunchDate : 2024-04-02T03:03:55.747Z
Size : size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1