Specification Brand : SSC Controls BulletPoint1 : Electrical heavy-duty foot switch with front gate for added measure of safety. BulletPoint2 : Momentary action - Press and hold foot to turn on, release to turn off. BulletPoint3 : Includes one 20 A, 125 / 250 VAC, SPDT switch. BulletPoint4 : Rugged cast aluminum housing is oiltight, dusttight, & watertight (when properly connected). BulletPoint5 : Made in USA. Certified to UL and CSA standards. Color : Black and Orange ConnectivityProtocol : X-10 ConnectorType : Clamp ControlMethod : voice CurrentRating : 20 amps ExternallyAssignedProductIdentifier : 5693671165656 InternationalProtectionRating : IP56 ItemName : SSC Controls G500-MO-GT Foot Switch with Front Gate, Electrical, Momentary Action, Heavy Duty, Single Pedal, Industrial, SPDT ItemPackageDimensions_Height : 7 inches ItemPackageDimensions_Length : 12 inches ItemPackageDimensions_Width : 7 inches ItemPackageQuantity : 1 ItemTypeKeyword : electronic-component-foot-switches Manufacturer : SSC Controls Material : Aluminum ModelNumber : G500-MO-GT MountingType : Plug In Mount NumberOfItems : 1 NumberOfPositions : 3 OperatingVoltage : 250 volts OperationMode : ON-NONE-OFF PartNumber : G500-MO-GT ProductDescription : The G500-MO-GT is a heavy-duty foot switch with a front gate, which provides an additional measure of safety. The user must first lift the gate before operating the foot switch, so it helps prevent accidental activation of the foot pedal. Features the high-quality construction of the G-Series, a tough aluminum housing that won’t rust or easily break when dropped, an oversized guard (5.5” high, 6.2" wide) with enough room to fit large boots, and an oil/water/splash/dust-resistant enclosure (when used with the proper cable clamp). This is a momentary foot switch, which means that it actuates when your foot is on the pedal, and de-actuates when you release your foot from the pedal. Includes a single 20-amp 125/250VAC-rated switch with one common, one normally open, and one normally closed contact (SPDT, Form C). Side cover flaps help protect pedal lever and shaft from oil, solvents, and water. 3/4"-14 N.P.T. threaded conduit entry in back. Also see the SSC Controls C1 Cable Clamp or C2 Cable Clamp if you don't already have a strain relief. The Front Gate Option (-GT) is available on any G-Series foot switch model. UL/CSA/NEMA Enclosure Type 2, 4, & 13. IEC rating IP56. Size: 9.2" L x 6.2" W x 5.5" H. UL Listed and CSA Certified. One year warranty on parts and labor. Made in the USA by SSC Controls Company. ProductSiteLaunchDate : 2016-02-06T08:00:00.000Z SpecificationMet : csa standards SwitchType : Foot Switch SwitchType1 : Pressure Switch SwitchType2 : Foot Switch TerminalType : Spdt UnitCount : 1 UnspscCode : 39122222