Cart 2 india

Specification
Brand : SSC Controls
BulletPoint1 : Electrical heavy-duty foot switch with oversized guard to turn on and off a device.
BulletPoint2 : Momentary Action with Anti-Trip Safety Latch - Push forward safety latch before pressing down foot pedal.
BulletPoint3 : Includes one industrial 20 A, 125 / 250 VAC, SPDT switch.
BulletPoint4 : Rugged cast aluminum housing is oiltight, dusttight, & watertight (when properly connected).
BulletPoint5 : Made in USA. Certified to UL and CSA standards.
CircuitType : 2-way
ConnectivityProtocol : X-10
ConnectorType : Clamp
CurrentRating : 20 amps
ExternallyAssignedProductIdentifier1 : 0699938292092
ExternallyAssignedProductIdentifier2 : 699938292092
IncludedComponents : no
InternationalProtectionRating : IP56
ItemName : SSC Controls G500-AT Foot Switch, Electrical, Momentary Action with Anti-Trip Safety Latch, Single Pedal, Heavy Duty, Industrial, SPDT
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-foot-switches
LightType : LED
LowerTemperatureRating : 1 degrees_fahrenheit
Manufacturer : SSC Controls
Material : Aluminum
ModelNumber : S420-1502
MountingType : Wall Mount
NumberOfItems : 1
NumberOfPositions : 2
OperatingVoltage : 125 volts_of_alternating_current
OperationMode : ON-NONE-OFF
PartNumber : G500-AT
ProductDescription : Heavy duty foot switch makes it easy to turn electrical equipment on and off with the foot. The G500-AT includes an Anti-Trip safety latch inside the pedal cover – simply push the latch forward with your toe before pressing down on the foot pedal. The pedal then has a momentary action, which means you have to keep your foot on the pedal to keep it activated, and when you remove your foot it will return upright to the original position. Features all aluminum construction, an oversized guard (5.5” high, 6.2" wide) with enough room to fit large boots, and an oil/water/splash/dust-resistant enclosure (when used with the proper cable clamp). Includes a single 20-amp 125/250VAC-rated switch with one common, one normally open, and one normally closed contact (SPDT, Form C). Side cover flaps help protect pedal lever and shaft from oil, solvents, and water. 3/4"-14 N.P.T. threaded conduit entry in back. Also see the SSC Controls C1 Cable Clamp or C2 Cable Clamp if you don't already have a strain relief. UL/CSA/NEMA Enclosure Type 2, 4, & 13. IEC rating IP56. Size: 9.2" L x 6.2" W x 5.5" H. UL Listed and CSA Certified. One year warranty on parts and labor. Made in the USA by SSC Controls Company.
ProductSiteLaunchDate : 2015-11-24T08:00:00.000Z
SpecificationMet : csa standards
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Foot Switch
TerminalType : Spdt
UnitCount : 1
UnspscCode : 39122222
UpperTemperatureRating : 1 degrees_fahrenheit