Cart 2 india

Specification
Amperage : 18 amps
Brand : The Aftermarket Group
BulletPoint : Drive Replacement Wheelchair Parts (All Parts Sold Separately) Parts for TR16, TR18, TR20 - Poly-Fly Wheelchair/Flyweight Transport Chair Combo - 34. Back Release Lever
BulletPoint1 : 1-3/8 Inch Pin Spacing
BulletPoint2 : 7 Inch Wide x 6 Inch Deep Black Aluminum Footplate
BulletPoint3 : No-Tool Adjustable Length
BulletPoint4 : After Walker Holder is secured to the seatback place your folded walker down into the bottom pocket. Pull the fastening straps around your walker and buckle, tighten if necessary. If your walker does not fit into the bottom pocket, either turn the walker upside down, or place only 2 or 3 of the legs into the pocket.
BulletPoint5 : Number of Batteries Required for a Full Replacement: 2
Color : Silverframeandblackupholstery
CompatibleDevices : Scooter
CustomerPackageType : Standard Packaging
Directions : 1. Attach the walker holder quickly and easily to the back of your mobility scooter's seat. 2. Slip the harness of the Walker Holder over the top of your seatback. 3. Tighten the harness at the buckle. 4. Place your folded walker down into the bottom pocket. 5. Pull the fastening straps around your walker and buckle, tightening if necessary. 6. If your walker does not fit into the bottom pocket, either turn the walker upside down, or place only 2 or 3 of the legs into the pocket.
ExternallyAssignedProductIdentifier1 : 841447111146
ExternallyAssignedProductIdentifier2 : 0841447111146
ExternallyAssignedProductIdentifier3 : 00841447111146
ExternallyAssignedProductIdentifier4 : 0642222895370
FdaDeviceClassification : i
FdaIndicationOfUse : otc
FdaInstructionsForUseType : consumer
FdaLabelType : consumer
Hazmat1 : BATTERIES, WET, NON-SPILLABLE
Hazmat2 : UN2800
Hazmat3 : II
IncludedComponents : Footrest Assembly
ItemName : The Aftermarket Group - TAGRP1716013P Wheelchair Footrest Assembly, Hemi Spacing, Black Aluminum Footplate with Heel Loops, 1 Pair, TAG1716013P
ItemPackageDimensions_Height : 44.3992 centimeters
ItemPackageDimensions_Length : 10.3124 centimeters
ItemPackageDimensions_Width : 25.6032 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wheelchair-and-mobility-scooter-foot-and-rests
Manufacturer : Invacare
Material : Polyester
ModelNumber : S73-8357
NumberOfBoxes : 1
NumberOfItems : 2
PackageLevel : unit
PartNumber : TAGRP1716013P
ProductDescription : You need a mobility scooter outdoors and you need a walker indoors or for short stretches. So how do you use the scooter while keeping the walker handy? Our Universal walker holder for mobility scooters offers a solution to the problem. The walker holder quickly and easily attaches to the back of your scooter's seat, and once it is in place, you are ready to carry your walker along with you.

We call this our Universal walker holder because unlike name-brand specific walker holders, this model will work on just about any and every mobility scooter out there today. It may even function fine on many power chair models without a lot of seat tilt. The holder is constructed from high quality, durable, and water resistant polyester.


Installation: Slip the harness of the Walker Holder over the top of your seatback so that the fastening straps and bottom pocket hang from the seatback, and then tighten the harness at the buckle.

After Walker Holder is secured to the seatback place your folded walker down into the bottom pocket. Pull the fastening straps around your walker and buckle, tighten if necessary. If your walker does not fit into the bottom pocket, either turn the walker upside down, or place only 2 or 3 of the legs into the pocket.
ProductSiteLaunchDate : 2020-02-07T08:00:01.000Z
RecommendedUsesForProduct : Scooter
Reusability : Rechargeable
Style : Footrests w/ Aluminum Footplates
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureRating : Ambient: 15 to 25 C (59 to 77 F)
UnitCount : 1
Voltage : 12 volts