Cart 2 india

Specification
Brand : J.V. Converting
BulletPoint1 : JVCC DC-UHB60FA-G Ultra High Bond Double-Sided Tape is constructed of a grey foamed acrylic system which has excellent all-around bonding properties which allow for very high performance in the most demanding of applications. Ideal for all-around bonding in the most demanding of applications. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance.
BulletPoint2 : This double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application.
BulletPoint3 : At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours.
BulletPoint4 : Carrier/Backing: foamed acrylic. Adhesive: ultra-high bond acrylic. Release Liner: red polyethylene film. Thickness: 59.1 mils (carrier, adhesive).
BulletPoint5 : Adhesion: 139 ounces per inch (to stainless steel test panel). Tensile Strength: 78 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 194F. Dynamic Shear Strength: 78 pounds per square inch. Short Term Temperature Resistance: up to 302F. Core: 3-inch diameter plastic.
Color : Grey
CompatibleMaterial1 : Acrylic
CompatibleMaterial2 : Plastic
CompatibleMaterial3 : Stainless Steel
CompatibleMaterial4 : Vinyl
CompatibleMaterial5 : Acrylic
CompatibleMaterial6 : Plastic
ExternallyAssignedProductIdentifier1 : 695087747032
ExternallyAssignedProductIdentifier2 : 0695087747032
ItemDisplayDimensions_Height : 0.25 inches
ItemDisplayDimensions_Length : 9.75 inches
ItemDisplayDimensions_Width : 9.75 inches
ItemDisplayWeight : 0.5 pounds
ItemName : JVCC Ultra High Bond Double-Sided Tape [Grey Foamed Acrylic - 59 mil] (DC-UHB60FA-G): 1/4 in. x 82 ft. (Grey)
ItemPackageDimensions_Height : 0.25 inches
ItemPackageDimensions_Length : 9.75 inches
ItemPackageDimensions_Width : 9.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : foam-tape
Language : spanish
Manufacturer : JVCC
Material : foamed acrylic
Material1 : Foam
Material2 : Acrylic
Material3 : Vinyl
Material4 : Foam
Material5 : Acrylic
ModelNumber : Ultra High Bond Double-Sided Tape [Grey
NumberOfItems : 1
PartNumber : DC-UHB60FA/GRY02527
ProductDescription :

JVCC DC-UHB60FA-G Ultra High Bond Double-Sided Tape is constructed of a grey foamed acrylic system which has excellent all-around bonding properties which allow for very high performance in the most demanding of applications. Ideal for all-around bonding in the most demanding of applications. The pressure-sensitive acrylic composition has very good tack; has excellent adhesion to a variety of surfaces; and has high shear strength performance. The tape is carried on a red, release coated polyethylene liner that is easily removed. Has good UV resistance.

This double-sided (AKA double-coated) tape will bond to most surfaces including many plastics, composites, sealed woods, and metals; however thorough evaluation is recommended when bonding to low energy surface material such as Polyethylene, Polypropylene, silicones, and Teflon. For lower energy surfaces may need to use an adhesive promoter/primer such as IPA (isopropanol) on the substrate prior to application. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. At a minimum application-pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. The dwell time the tape needs to be in contact with both surfaces before it reaches its maximum adhesion is 1 to 24 hours.

The color name grey can also be spelled as gray. Warning: This product can expose you to chemicals including Carbon black (airborne, unbound particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.
ProductSiteLaunchDate : 2012-03-13T22:10:45.859Z
RecommendedUsesForProduct : Indoor, Outdoor
Size : 1/4 in. x 27.34 yds. (6.3mm wide)
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Plastic
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Glass
SurfaceRecommendation3 : Wood
UnitCount : 1
UnspscCode : 31201500
WaterResistanceLevel : waterproof