Cart 2 india

Specification
Brand : ACE4U
BulletPoint1 : * Easy to install,mini size of quantitative controller
BulletPoint2 : * connect to Flow Sensor, temperature sensor if need, solenoid valve,power charr;show temperature, Monitor real-time liquid flow rate, quantitative flow control,total flow L / Gal.
BulletPoint3 : * Display temperature of liquid , need to extra add temperature sensor 50K NTC connection.
BulletPoint4 : * Control quantitative flow , when flow reach to the presetting flow ,
BulletPoint5 : * LCD system will output signal to solenoid valve switch ON/OFF.
BulletPoint6 : Welcome and I wish you a happy life, my friend.
Color : One Color
ExternallyAssignedProductIdentifier : 7505690951180
ItemName : ZJ-LCD-M Quantitative Control Flow Sensor Meter, LCD Display Water Flow Meter G1/2 Hlal Sensor YF-B2 -Water Hose Meter
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-flowmeters
Manufacturer : ACE4U
MeasurementAccuracy : 1
ModelNumber : 1005004695775838
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 1005004695775838
ProductDescription : Features

* Monitor Total Flow
* Passwords can protect setting value.
*When flowmeter is working , faucet dynamic display.
Specifications :
*Display Working volta : DC24V +/-8V 1A
* Flow Sensor : Brass housing YF-B2(G1/2) ;inside plastic support.
*Flow Sensor ran : 1~25L/min
* Accuracy : +/- 3~5%
* LCD Sizes 3" , bult-in Blacklight.
*Viewing Angle:0~120 degree
*solenoid valve working volta : DC12V/ 0.3-0.5A (N.C. type)
*Controller case size :103x77x35mm, Controller cutout size 98x73mm.
*quantitative ran of :0.1~9999 Liters
* Power adapter : AC in to 24Vdc 1.5A out to connect LCD
Noted : if water is not clean, advice to use filter before water in .
FQA :
1. Can set capacity in to a certain amount of?
for example: put 2 liters, start to Run, until 2 liter measurement,
then shut down device (valve) and water stop flow.
2. If do not want to make quantitative control, can it to be measurement only ?
A: Yes, not set the MAX : quantitative number, let the number there 0.
and not connect valve , so it will measure TOTAL flow how many L or Gal .
3. if measurement result different, can it be calibrated ?
Yes , because connect different flow sensor, the conversion is different,
adjust the K value number on Display (see the manual how to operate) to calibrate.
ProductSiteLaunchDate : 2024-09-09T08:50:41.406Z
Size : One Size
UnitCount : 1
UnspscCode : 41112500