Cart 2 india

Specification
AgeRangeDescription : adult
Brand : ViaGasaFamido
BulletPoint1 : Principle: When water passes through the rotor assembly, the electromagnetic rotor rotates, and the speed changes with the . The Hall sensor outputs the corresponding pulse as feedback to the controller, and the controller judges the water volume and adjusts the rate.
BulletPoint2 : Composition: The Water sensor is mainly composed of plastic valves, water rotor components and Hall sensors. It is light in weight, small in size and easy to install.
BulletPoint3 : Application: The Water sensor can be installed at the entrance of the water heater to measure water .
BulletPoint4 : Tightness: The sealing ring of The Water sensor adopts a mechanical structure, which bears pressure from the up and down direction and has good sealing performance.
BulletPoint5 : Specifications: The working measurement range of The Water sensor is 1~30L/min, the water pressure is 1.75MPa, the pipe thread is G1/2 (DN15), and the outer diameter of the thread is 2 cm.
Color : Hp-866a
ExternallyAssignedProductIdentifier : 7509083979980
FinishType1 : Finish
FinishType2 : Finish
FinishType3 : Finish
FinishType4 : Finish
FinishType5 : Finish
IncludedComponents : water flow indicator*1, tape*1
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
IncludedComponents4 : inc
IncludedComponents5 : inc
ItemName : Water Sensor, Water Flowmeter, DN15 G1/2 Hall Effect Fluid Meter Counter 1-30L/min
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-flowmeters
Manufacturer : ViaGasaFamido
Material1 : Material
Material2 : Material
Material3 : Material
Material4 : Material
Material5 : Material
Material6 : Material
Material7 : Material
Material8 : Material
Material9 : Material
ModelName : 1005004952744233
ModelNumber : 1005004952744233
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ViaGasaFamidof46upxickm1340
PowerSourceType : PowerSource
ProductDescription : Description:
Water sensor is mainly composed of plastic valve, water rotor subassembly and hall sensor.It is mounted on water heater inlet and used to meter water . When water goes through rotor subassembly, magnetic rotor rotates and rotating speed changes with the . Hall sensor outputs corresponding pulse as feedback to controller and controller judges water amount and adjusts .


Features:
This sensor meter is lightweight, small and easy to install. The internal impeller has stainless steel shaft which is quite wear-resistant. Seal ring uses mechanical structure that stressed from up and down directions and will not leak. The sensor has high quality Hall effect and is encapsulated with glue, preventing from water entering. It is a great sensor of high precision, long service life and

Specifications:
Working Range: 1~30L/min
Water Pressure: 1.75MPa
Pipe Thread: G1/2 (DN15)
Thread Outer Diameter: Approx. 2cm
Output Waveform:
Size: 6.1*3.4cm/2.4*1.3in

Wiring:
Red: IN+
Yellow: OUT ( output)
Black: GND-


Note:
1, Forbidden to severe impact and chemical erosion.
2, Forbidden to throw or collision.
3, Water detection should be same as the arrow on sensor.
4, Water temperature should not be more than 120.


Package Includes:
1 x Sensor

ProductSiteLaunchDate : 2021-02-05T14:17:10.813Z
Size : 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 46171600