Cart 2 india

Specification
Brand : FTVOGUE
BulletPoint1 : For Control: When the water passes through the water rotor assembly, the magnetic rotor rotates and the speed changes with the rate. The Hall sensor outputs the corresponding pulse signal and feeds it back to the controller to judge the size of the wat
BulletPoint2 : Water Meter: Mainly consisted of a valve body, a water rotor assembly and a Hall sensor.
BulletPoint3 : Wide Application: Can be used for water heater, credit card machine, water vending machine and so on.
BulletPoint4 : Stable Working: Resistant to high temperature, enables stable working as well as low pressure starting.
BulletPoint5 : Easy to Install: Designed to have a light weight and a small size, very easy to store and install.
IncludedComponents : No
ItemName : 2Pcs Water Sensor Meter Flowmeter 1.3in Brass Male Thread for Swimming Pool Pipe
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : science-lab-flowmeters
Manufacturer : FTVOGUE
MeasurementAccuracy : 0.1mm
ModelName : FTVOGUE1u0vqcoxrd
ModelNumber : FTVOGUE1u0vqcoxrd
NumberOfItems : 1
PartNumber : FTVOGUE1u0vqcoxrd
ProductDescription : Specification:
Item Type: Water Sensor
Output Signal: Output NPN pulse signal.
Model: YF-B10
Interface Size: 1.3in british system male external thread.
Inner Diameter: Approx. 24.38mm / 1in
Outer Diameter: Approx. 32.9mm / 1.3in
Thread Length: Approx. 13mm / 0.5in
Material: Brass
Water Pressure : >1.75MPa
Output Pulse Duty Cycle: 50%±10%
Load Capacity: ≤10mA (DC5V)
Insulation : >100MΩ
Range: 2~50 L/min ± 5%
Tightness: Close each hole, add 1.7Mpa water pressure test for 1 minute, no leakage and deformation.
Pulse Characteristics: F=(8xQ-4)±5%, F is frequency, Q is L/Min.

packing list:
2 x Water Sensor

Notice:
1. Severe impact and chemical erosion are strictly prohibited.
2. Throwing or collision is strictly prohibited.
3. Install in the direction of the installation arrows on the product.
4. The temperature of the medium should not exceed 120℃.
ProductSiteLaunchDate : 2024-11-07T09:15:51.020Z
UnspscCode : 46170000