Cart 2 india

Specification
Brand : Hilitand
BulletPoint1 : MAIN FUNCTION: This digital turbine meter has modular design which is suitable for use with output modules, sensors and remote transmitters. The range is 10-90L/min
BulletPoint2 : WIDE RANGE OF USE: Our digital turbine meter can be widely used to measure , , kerosene, gasoline, etc. Light weight, compact structure, easy to install.
BulletPoint3 : EXCELLENT PERFORMANCE: High‑definition displays show both instantaneous and cumulative . Intuitive clear reading, high reliability, measuring accuracy is ±1%.
BulletPoint4 : MALFUNCTION AND SOLUTION: The meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The rate on the meter is below the lowest. Increase the rate. 3. The meter is blocked by the dry liquid. Take out the impelle
BulletPoint5 : MALFUNCTION AND SOLUTION: 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly. 6. Too close to the motor or electronic noise environment Install
ExternallyAssignedProductIdentifier : 7679370033814
ItemName : 2pcs Mini Digital Turbine Flowmeter 10‑90L min Fuel Meter with 1inch BSPT Female Thread Size
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : science-lab-flowmeters
Manufacturer : Hilitand
ModelName : Genericgh1wr9zb8o
ModelNumber : Hilitandgoehvtfxbp
NumberOfItems : 1
PartNumber : Hilitandgoehvtfxbp
ProductDescription : Specification:
Thread size: 1inch BSPT female
Material: Plastic
Color: Blue
Repetition: ±0.5%
Measure accuracy: ±1%
Maximum working pressure: 20BAR
range: 10-90L/min
Single count: 0.00-9999.9
Total cumulative count: 0-999999
Error coefficient: 0.1000-9.9999
Unit: L / GAL / PTS / QTS
Working temperature: -10°C ~ +60°C(14°F~140°F)
Operating voltage: 2.3-3.3V
Application: , , kerosene, gasoline Battery type: 2 x AAA LRO3 batteries
Weight: 270g / 9.5oz (approx.)


Package list:
2 x Turbine meter


Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.


The reading numbers faded or blanked out. 1.Battery is exhausted or not connected Check the batteries or even replace them.
rate is normal but the meter can not count. Press the button of DISPLAY, the meter starts. 1. Field calibration is not correct. Calibrate again.
2. The impeller is blocked or damaged. Remove the meter and make sure the impeller turns freely.
3.The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely.

rate is low and the meter can not count. Press the button of DISPLAY, the meter starts. 1. The meter is blocked by the dry liquid. Take out the impeller, clean it carefully and make sure the impeller turns freely.
2. The rate on the meter is below the lowest. Increase the rate.
The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board.
2. Button is fail to press. Replace the circuit board.
ProductSiteLaunchDate : 2024-10-10T15:23:31.936Z
UnitCount : 1
UnspscCode : 40141600