Cart 2 india

Specification
Brand : uxcell
BulletPoint : Made in United States
BulletPoint1 : Light weight, small size, easy to install.Hall element is imported, water-proof design to prevent water ingress,The inside of the impeller is inlaid with a stainless steel shaft and is always wear-resistant.
BulletPoint2 : All materials are in line with SGS testing standards.
BulletPoint3 : Three wire connection: Red for positive, black for negative, yellow for pulse signal.
BulletPoint4 : The water flow sensor is applied for water heater, and can be used as flow switch.
BulletPoint5 : Maximum water pressure: 1.2MPa, flow range: 0.15-1.5L/min.
Color : White
ConnectivityProtocol : X-10
ConnectorType : screw
ControlMethod : application
CurrentRating : 0.01 amps
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 5693671147447
ExternallyAssignedProductIdentifier1 : 702004746228
ExternallyAssignedProductIdentifier2 : 0702004746228
IncludedComponents : Float Switch Connector
InternationalProtectionRating : IP65
ItemName : uxcell 1/4" Hall Effect Water Flow Sensor Switch Flowmeter Counter Fluid Meter DC5V 0.15-1.5L/Min SEN-HZ06K
ItemPackageDimensions_Height : 17.6 centimeters
ItemPackageDimensions_Length : 2.8 centimeters
ItemPackageDimensions_Width : 14.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-flow-switches
Manufacturer : uxcell
Material : Stainless Steel
ModelNumber : a18041200ux0134
MountingType : Wall Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 2
OperatingVoltage : 5 volts
OperationMode : ON-NONE-OFF
PartNumber : a18041200ux0134
PowerSourceType : Ac/dc
ProductDescription : 1. The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part. All materials are in line with SGS testing standards.
2. There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
3. Three wire connection: Red for positive, black for negative, yellow for pulse signal.


Specifications:

Product Name: Water Flow Sensor
Material: POM(Shell)
Liquid Temperature: Not More Than 60C
Rated Voltage: DC 5V
Max Current: 10mA(DC 5V)
Maximum water pressure: 1.2MPa
Flow Range: 0.15-1.5L/min
Connector Size: 1/4
Ingress Protection Rating: IP65
Connector: Male XH-3P
Cable Length: 34cm
Size: 86mm x 40mm x 24mm(L*W*H)
Color: White
Net Weight: 32g

Package Included:

1 x Water Flow Sensor

Note:

1. Installed in accordance with flow direction in the back of product, otherwise there is no signal output.
2. A filter screen must be installed at the inlet of the sensor, in order to avoid particles and debris entering the sensor.
ProductSiteLaunchDate : 2018-06-08T13:12:07.821Z
Size : 0.15-1.5L/min
SpecificationMet : Sgs Testing,sgs Testing Standards.
Style : Diaphragm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Flow Switch
SwitchType1 : Flow Switch
SwitchType2 : Pressure Switch
SwitchType3 : Temperature Switch
TerminalType : Through Hole
UnitCount : 1
UnspscCode : 39122200
UpperTemperatureRating : 60 degrees_celsius