Cart 2 india

Specification
Brand : Midwest Control
BulletPoint : Made in United States
BulletPoint1 : Sight Glasses Allow for Visual Inspection of Oil and Water in Tanks, Gear Cases, Bearing Houses and Mixers
BulletPoint2 : Steel Construction, Nickel Plated Surface
BulletPoint3 : Plain Glass Window Fused to Housing
BulletPoint4 : Built- In Reflector Makes It Easier to See Dark Liquids in Low Light Environments
BulletPoint5 : Maximum Operating Temp Up to 500°F
ConnectivityProtocol : X-10
ConnectorType : Screw
CurrentRating : 15 amps
ExternallyAssignedProductIdentifier : 8851680031882
InternationalProtectionRating : IP54
ItemName : Midwest Control SGHP-100RF Sight Glass with Built in Reflector, 1" MPT, Nickel Plated Steel, 1250 psi, 1.38" x 1.06"
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-flow-switches
Manufacturer : Midwest Control
Material : Nickel Plated Steel
Material1 : Copper
Material2 : Stainless Steel
ModelNumber : SGHP-100RF
MountingType : Surface Mount
NumberOfItems : 1
NumberOfPositions : 1
OperatingVoltage : 6 volts
OperationMode : Electrical
PartNumber : SGHP-100RF
ProductDescription : This flow switch is made of selected stainless steel materials, it is not easy to be damaged by external corrosion, and has a long service life. When the flow exceeds the set value, the fluid of the flow switch drives the blade and the micro switch, and the SPDT contact can connect one circuit and disconnect other circuits. It is usually used where interlocking or cutoff protection is required. This product is used to measure the dynamic state of the fluid flowing through the pipeline, such as: water, dilute ethylene, glycol and other liquids that have no corrosive effect on copper. It is mainly used in water treatment systems, central air conditioning, water cooling units, fire fighting systems and other fields.

Spec:
Condition: 100% brand new 
Material: Stainless steel & Plastic
Weight: 518g/18.3oz
Voltage: 6380V
Interface size: 1
Control mode: Paddle
Maximum working pressure: 1.0mpa
Ambient temperature: 0C~60C
Liquid temperature: 10c100c (nonfreezing)
Micro switch: single pole double throw (SPDT)
Contact life: 100, 000 times
Electrical parameters of micro switch: 220VAC, 15A

Installation method:
1. Open the flow switch
2. The switch has been set at minimum flow rate. Turn the adjusting screw counterclockwise to increase the flow setting value.
3. Press the target to check whether the micro switch can work normally. Excessive clockwise rotation of the adjusting screw may lead to the failure of the flow switch.
4. After the installation, please press the lever of the flow switch several times to check. If there is no click sound, turn the adjusting screw counterclockwise until there is click sound.
5. The adjustment screw of lacquer seal is only used for the first time to adj

ProductSiteLaunchDate : 2016-08-26T08:00:01.000Z
StreetDate : 2017-03-14T00:00:01Z
SwitchType : Float Switch
SwitchType1 : Pressure Switch
SwitchType2 : Temperature Switch
TerminalType : Spdt
UnitCount : 1
UnspscCode : 40000000