Cart 2 india

Specification
Brand : Hilitand
BulletPoint : Made in United States
BulletPoint1 : APPLICATIONS: Mainly used in water treatment systems, central air conditioning, water cooling equipment, fire systems, etc.
BulletPoint2 : PAEAMETERS: High quality materials, sturdy and . Medium temperature: 0 ° C ~ 120 ° C. Maximum working pressure: 1.0Mpa. The control value is adjustable, and the action repetition point is stable.
BulletPoint3 : WATER SWITCH: Usually used in places where interlocking or "breaking" is required. The number of paddles and the length of the paddle can be adjusted to suit different pipe diameters and rates.
BulletPoint4 : NOTE: The HFS water switch must not be subjected to water hammer. If a quick closing valve is installed downstream of the water switch, a throttle must be used.
BulletPoint5 : WORKING PRINCIPLE: When the rate exceeds the set value, the fluid pushes the paddle and drives the top micro switch through the mechanical device in the water switch.
ConnectivityProtocol : X-10
ConnectorType : Screw
CurrentRating : 15 amps
ExternallyAssignedProductIdentifier : 7436829266748
ExternallyAssignedProductIdentifier1 : 781593450884
ExternallyAssignedProductIdentifier2 : 0781593450884
InternationalProtectionRating : IP65
ItemName : HFS-15 1/2" 6-380V Target Water Treatment Water Paddle Switch, Adjustable Liquid 220VAC, 15A
ItemPackageDimensions_Height : 16.2 centimeters
ItemPackageDimensions_Length : 7.3 centimeters
ItemPackageDimensions_Width : 9.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-flow-switches
Manufacturer : Hilitand
Material : Brass+ iron nickel plated+ stainless steel+ plasti
Material1 : Copper
Material2 : Stainless Steel
ModelNumber : 10A172
MountingType : Surface Mount
NumberOfItems : 1
NumberOfPositions : 1
OperatingVoltage : 6 volts
OperationMode : ON-OFF
PartNumber : Hilitando3bga0qtgu
ProductDescription : Specification:
Control type: Paddle type (target type)
Maximum working pressure: 1.0MPa
Ambient temperature: 0-60
Liquid temperature: -10-100 (fluid under non-icing condition)
Micro switch: single pole double throw (SPDT)
life: 100,000 times
Micro switch electrical parameters: 220VAC, 15A
Material: The joint is brass, the shell is iron-plated , the blade is stainless steel, and the outer casing is plastic
Applications: Water treatment systems, central air conditioning, water cooling units, fire systems, etc.
Interface size: 1/2" (HFS-15)

Package list:
1 * Water switch
3 * Paddles
1 * Chinese and English operation manual

Installation and adjustment:
1. Open the switch housing.
2. The switch has been set to the minimum value when it leaves the factory. Increase the setting and turn the adjusting screw counterclockwise.
3. Press the target to check if the micro switch can work normally. Excessive clockwise rotation of the adjusting screw may cause the switch to fail.
4. After the installation is finished, please check by pressing the switch lever several times. Once there is no click sound when the lever is recovered, turn the adjusting screw counterclockwise until there is a click sound when replying.
5, the paint seal adjustment screw is only for factory adjustment of the switch state, please do not change or adjust.
6. Three working cycles should be observed to make sure that the switch and the system connected to it are functioning properly and that the switch housing is covered in time.

ProductSiteLaunchDate : 2019-07-30T00:00:00.000Z
SpecificationMet1 : CSA
SpecificationMet2 : UL
StreetDate : 2017-03-14T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Float Switch
SwitchType1 : Flow Switch
SwitchType2 : Pressure Switch
SwitchType3 : Temperature Switch
TerminalType : Spdt
UnitCount : 1
UnspscCode : 39122200